Member Since: 20 May 2011
Location: bournemouth
Posts: 24
Suspension pipe
I have a classic compressor prob, so bought a new one,. that was the easy part removing the pump has been a real pain.
Where i am now is the pump is in bits but i still can not remove the bottom air its seized solid, tried WD40 patience to no avail.
Am i right iwill have to order a new pipe as cutting it wont remove it from the housing
if i cut it where do you get joiners from
Thanks for any suggestions
5th Nov 2011 6:01 pm
Nasher
Member Since: 07 Mar 2009
Location: Clanfield, North of Pompey - UK
Posts: 2686
Is it the bottom rear pipe?
I had problems getting mine out the first time.
If you keep going it will come out. Like you I flushed it out with WD40 a few times, which removed loads of crud and dust, and very gently twisted the Brass collet with a pair of pliers.
Eventually enough muck was flushed out and dislodged to make room for the collet to be pushed in and release the pipe.
Obviously the Front connectors with the plastic covers on the collets are not as tough if you need to twist them.
Nasher.Heaven doesn't want me, and hell is afraid I'll take over.
5th Nov 2011 6:53 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20733
Common problem, I ended up cutting the pipe, and joining it with another piece of pipe, and an inline connector My D3 Build Thread
Member Since: 20 May 2011
Location: bournemouth
Posts: 24
Thanks for suggestions what can i say lost patience broke fck in collar took pump apart in situ hoping i could push it from other end. No joy so brought out the big gun the mighty Dremel.
Will survey damage tomorrow
Has anyone got the address of the guy at LR who thought of this great piece of engineering would like to introduce him to my friend PAIN aka Mrs Broncoupe
cheers
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum