cornishpirate
Member Since: 04 Sep 2014
Location: Cornwall
Posts: 168
|
I need to replace the crossover pipe on my D3 and have found a stainless aftermarket one on flea bay for £180.00.
Does anyone have experience with these aftermarket pipes?
I don't want to fit one of these pipes and then have to repeat the job if they are no good
manY thanks for any feedback
CP 10 D4 Bali Blue
FBH Controller
Goodyear Duratracs
raised air intake
30mm spacers all round
|
30th Jun 2019 2:32 pm |
|
|
|
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 871
|
Seen the same as you and wondered the same . Is their a difference for manual and autos ? Got to ask the silly question Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
|
30th Jun 2019 3:33 pm |
|
|
cornishpirate
Member Since: 04 Sep 2014
Location: Cornwall
Posts: 168
|
Disco_Mikey wrote:I'd be very wary of a pipe that cheap...
Any recommendations for a replacement Mikey? 10 D4 Bali Blue
FBH Controller
Goodyear Duratracs
raised air intake
30mm spacers all round
|
30th Jun 2019 9:48 pm |
|
|
|
cornishpirate
Member Since: 04 Sep 2014
Location: Cornwall
Posts: 168
|
Thank You 10 D4 Bali Blue
FBH Controller
Goodyear Duratracs
raised air intake
30mm spacers all round
|
30th Jun 2019 11:03 pm |
|
|