- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
|
not having seen the mag , where do these spacers fit?
|
28th Feb 2007 12:50 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Errr between the wheels & the hub.........? Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
28th Feb 2007 12:52 pm |
|
|
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
|
30mm seems a lot, I would have thought there was a chance of fouling the wheelarch with that much, hence the question (and being too lazy to read the thread properly )
|
28th Feb 2007 12:59 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
mmm I see what you mean. But I guess it must work OK, perhaps only in off road height mode? Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
28th Feb 2007 1:02 pm |
|
|
christyler
Member Since: 31 Dec 2005
Location: Cork, Ireland
Posts: 1168
|
10forcash wrote:30mm seems a lot, I would have thought there was a chance of fouling the wheelarch
Hi 10,
It seems a lot when you say it ,but in practise it works fine. No fowling at all, and we did operate the suspension at full travel in all directions. CLUB "Ah Shor it'll be grand"
First D3 in the World with a Hydraulic Winch.
2006 Disco 3 TDV6 S Auto,
Diff Locks, Turbochipped, Raised Air Intake, 220volts Onboard, Onboard Compressor, Large Bore Exahust, Underbody Protection, One or two Other Mods as well.
Other toys include, Argo Avenger 8x8, Tatra 6x6 Motorhome (Being Built)
|
28th Feb 2007 1:03 pm |
|
|
bkehoe
Member Since: 24 Feb 2006
Location: Wexford
Posts: 1481
|
I'm surprised the wheel nuts still work, or do these spacers first bolt onto the hub and have their own seperate bolts for the wheels to go onto? IE - 05 D3 TDV6 HSE - Zambezi Silver
SA - 07 VW Golf TDI - White - Sold!
|
28th Feb 2007 1:10 pm |
|
|
christyler
Member Since: 31 Dec 2005
Location: Cork, Ireland
Posts: 1168
|
bkehoe wrote:I'm surprised the wheel nuts still work, or do these spacers first bolt onto the hub and have their own seperate bolts for the wheels to go onto?
you second assumption is correct, the spacers bolt to the hub with there own bolts. then the wheels bolt on to the spacer with the standard wheel nuts. CLUB "Ah Shor it'll be grand"
First D3 in the World with a Hydraulic Winch.
2006 Disco 3 TDV6 S Auto,
Diff Locks, Turbochipped, Raised Air Intake, 220volts Onboard, Onboard Compressor, Large Bore Exahust, Underbody Protection, One or two Other Mods as well.
Other toys include, Argo Avenger 8x8, Tatra 6x6 Motorhome (Being Built)
|
28th Feb 2007 1:17 pm |
|
|
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
|
christyler wrote:10forcash wrote:30mm seems a lot, I would have thought there was a chance of fouling the wheelarch
Hi 10,
It seems a lot when you say it ,but in practise it works fine. No fowling at all, and we did operate the suspension at full travel in all directions. nice one!
|
28th Feb 2007 2:38 pm |
|
|
christyler
Member Since: 31 Dec 2005
Location: Cork, Ireland
Posts: 1168
|
10,
You can have a look at Salisbury, I might have some other interesting stuff to look at as well. CLUB "Ah Shor it'll be grand"
First D3 in the World with a Hydraulic Winch.
2006 Disco 3 TDV6 S Auto,
Diff Locks, Turbochipped, Raised Air Intake, 220volts Onboard, Onboard Compressor, Large Bore Exahust, Underbody Protection, One or two Other Mods as well.
Other toys include, Argo Avenger 8x8, Tatra 6x6 Motorhome (Being Built)
|
28th Feb 2007 5:56 pm |
|
|
espri
Member Since: 07 Nov 2005
Location: Tyrol, Austria
Posts: 387
|
When I did the Winter LRE course in Finland last year, the D3 had chains on all 4 wheels and the instructors certainly never mentioned needing extra spacers for them. Have been too lazy to try my own chains yet - and we haven't had any snow (worth mentioning) here this year
Eric
|
28th Feb 2007 9:53 pm |
|
|
christyler
Member Since: 31 Dec 2005
Location: Cork, Ireland
Posts: 1168
|
espri wrote:the instructors certainly never mentioned needing extra spacers for them
Perhaps the spacers were fitted, and as you say they just never mentioned it. Or perhaps they were using inexpencive chains. i have seen some that are really thin, they probably wouldent need spacers. CLUB "Ah Shor it'll be grand"
First D3 in the World with a Hydraulic Winch.
2006 Disco 3 TDV6 S Auto,
Diff Locks, Turbochipped, Raised Air Intake, 220volts Onboard, Onboard Compressor, Large Bore Exahust, Underbody Protection, One or two Other Mods as well.
Other toys include, Argo Avenger 8x8, Tatra 6x6 Motorhome (Being Built)
|
28th Feb 2007 11:07 pm |
|
|
christyler
Member Since: 31 Dec 2005
Location: Cork, Ireland
Posts: 1168
|
Typical !!! I can not find a copy of LRM anywhere i have searched the whole country, They have Land Rover everything else just not monthly.
I must be the only person in the whole world that hasent seen the pic of MY D3 on the cover CLUB "Ah Shor it'll be grand"
First D3 in the World with a Hydraulic Winch.
2006 Disco 3 TDV6 S Auto,
Diff Locks, Turbochipped, Raised Air Intake, 220volts Onboard, Onboard Compressor, Large Bore Exahust, Underbody Protection, One or two Other Mods as well.
Other toys include, Argo Avenger 8x8, Tatra 6x6 Motorhome (Being Built)
|
2nd Mar 2007 9:57 pm |
|
|
bkehoe
Member Since: 24 Feb 2006
Location: Wexford
Posts: 1481
|
Call them, tell them who you are and ask them to send you a copy. I've not seen LRM around here either, usually get LRW, or sometimes LRO. A few places I asked used to do LRM up to a year or two ago, but stopped for some reason. IE - 05 D3 TDV6 HSE - Zambezi Silver
SA - 07 VW Golf TDI - White - Sold!
|
2nd Mar 2007 10:22 pm |
|
|
espri
Member Since: 07 Nov 2005
Location: Tyrol, Austria
Posts: 387
|
christyler wrote:Or perhaps they were using inexpencive chains. i have seen some that are really thin, they probably wouldent need spacers.
The chains were König 255s. I cannot imagine that they were thin, for these people use them every day and in conditions which are certainly much more severe than you would ever find on a normal road (see my avatar )
Eric
|
4th Mar 2007 7:50 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|