Member Since: 29 Aug 2008
Location: SW
Posts: 2390
Soldering
Having finaly pulled all the bits together for the FBH mod. Found my trusty soldering iron but it's the size of a fire poker . Plus I'm a bit ham fisted when it comes to delicate things.
So after a kind soul to help me out with a bit of soldering. I need the 2 wires soldering onto the oval timer.
Located in Warminster but willing to post/travel HONI SOIT QUI MAL Y PENSE
They shall not grow old as those of us left grow old. Age shall not weary them, nor the years condem. At the going down of the sun, and in the morning WE WILL REMEMBER THEM
17th Jan 2010 3:55 pm
peteJ
Member Since: 20 Sep 2009
Location: St Albans
Posts: 75
I'll do it for you...if you post to me..
PM me
17th Jan 2010 4:45 pm
neil
Member Since: 28 May 2009
Location: Wiltshire / Gloucestershire border
Posts: 164
I'm local just sent you a PM
17th Jan 2010 6:07 pm
MARKW
Member Since: 29 Aug 2008
Location: SW
Posts: 2390
Thank you for all the replies and PM's. Went to see Neil tonight. Spent 1/2 hr with him and now I have 2 wires attached.Very friendly chap and not bad with a hot iron HONI SOIT QUI MAL Y PENSE
They shall not grow old as those of us left grow old. Age shall not weary them, nor the years condem. At the going down of the sun, and in the morning WE WILL REMEMBER THEM
26th Jan 2010 9:19 pm
Iain G
Member Since: 31 Jan 2009
Location: Filey
Posts: 430
You only need to solder 1 wire BTW, as one side of the switch is connected to -ve.
26th Jan 2010 10:14 pm
MARKW
Member Since: 29 Aug 2008
Location: SW
Posts: 2390
O? In the instr on the big thread it shows wires on 2 bits of the circuit board. So that's what I had done. If I only need 1 wire then I'll discard the second HONI SOIT QUI MAL Y PENSE
They shall not grow old as those of us left grow old. Age shall not weary them, nor the years condem. At the going down of the sun, and in the morning WE WILL REMEMBER THEM
Yep, your gsm relay only needs to ground the one wire to "push" the flame button.
That's what the timer button does. However connecting the two wires does exactly the same thing if you have them already.Andy
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum