Member Since: 16 Aug 2016
Location: South Northants/Oxfordshire
Posts: 202
FOR SALE Superwinch Tigershark 11500 SR Winch & Hidden mount
Superwinch Tigershark 11500 with synthetic rope & corded remote control.
Removed from my D3, this set-up although looking a little weathered has only been used twice!
When I installed this winch I used the RLD hidden mount as a base and modified it to accommodate my AlliSport Intercooler (will still fit standard) and made a proper mount for the hawse. I also shortened the corners to reduce the amount of bumper internals to be trimmed.
I used the genuine Superwinch remote solenoid kit which consists of extended cables and connectors.
It would need a new solenoid as the waterproof box I mounted it in wasn’t so waterproof. The solenoid was sloshing about in water so I’d recommend replacement (approx. £45 for genuine). All solenoid brackets/connectors and cover included if wanting to refit solenoid to original location on top of winch.
Possibly needed would be the 2 brackets to mount the air suspension valve block and washer bottle. I forgot and left these on the Disco These were included with the RLD mount when I bought it but are very simple and could easily be made.
Also included is a Superwinch pulley block (unused), winching strap (unused), shackles, isolation switch and mount, a few spare connectors and spare cables.
This set-up cost me over £1000, so a bargain at £450 ovno collected (Nr. Banbury J11 M40).
Photos below with a couple of pre-install shots for reference.
[/b]
A few more pics, internals like new! End caps could do with a repaint.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
These were included with the RLD mount when I bought it but are very simple and could easily be made.
