Member Since: 11 Feb 2008
Location: North East
Posts: 792
[For Sale] D3 Manual Gear Linkage
Hi Folks,
I have for sale 2 manual gear linkages for a Discovery 3.
Part number is UKD500053 and they are both brand new so don't rattle or clunk. They supersede part number UKD500051 and are £230 + VAT from LR.
Looking for £90 inc postage to UK mainland or £80 collected from York area.
Pics below;
Click image to enlarge
Click image to enlarge
"UNDERSTEER" ---is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" -is how fast you hit the fence.
"TORQUE" ------------is how far you take the fence with you.
10th Sep 2013 9:44 am
Japseroony
Member Since: 11 Feb 2008
Location: North East
Posts: 792
Are these of any interest to anyone as from what I know these do go and rattle badly
Open to sensible offers "UNDERSTEER" ---is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" -is how fast you hit the fence.
"TORQUE" ------------is how far you take the fence with you.
15th Sep 2013 3:07 pm
chalky
Member Since: 21 Aug 2008
Location: Yorkshire
Posts: 3145
I'll give you £50 for one and pick up some time when passing ?
I'm in DoncasterOnly dead fish go with the Flow !
15th Sep 2013 5:22 pm
robbo770
Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
Member Since: 11 Feb 2008
Location: North East
Posts: 792
Not sure I can go as low as £50 but could do £70 collected?
Due to holidays these are not available for two weeks though, sorry.
Let me know as I think one may be spoken for already (PM earlier today) and I only have 2."UNDERSTEER" ---is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" -is how fast you hit the fence.
"TORQUE" ------------is how far you take the fence with you.
15th Sep 2013 5:27 pm
Japseroony
Member Since: 11 Feb 2008
Location: North East
Posts: 792
robbo770 wrote:
I have a PM in too"
PM replied to."UNDERSTEER" ---is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" -is how fast you hit the fence.
"TORQUE" ------------is how far you take the fence with you.
15th Sep 2013 5:29 pm
chalky
Member Since: 21 Aug 2008
Location: Yorkshire
Posts: 3145
Robbo its all yours BudOnly dead fish go with the Flow !
15th Sep 2013 5:29 pm
Japseroony
Member Since: 11 Feb 2008
Location: North East
Posts: 792
I have 2 so you can both have one?
Robbo has offered £65 so will let them both go for £65 each but that is collected and not posted or £70 posted. That's the best I can do chaps?"UNDERSTEER" ---is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" -is how fast you hit the fence.
"TORQUE" ------------is how far you take the fence with you.
15th Sep 2013 5:33 pm
Japseroony
Member Since: 11 Feb 2008
Location: North East
Posts: 792
So after interest from Chalky & Robbo and a deal I thought we had agreed these are still for sale
£65 collected or £70 posted - no offers please chaps as I would rather they went for scrap than get less having come down from £90 posted etc."UNDERSTEER" ---is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" -is how fast you hit the fence.
"TORQUE" ------------is how far you take the fence with you.
24th Sep 2013 8:37 am
woody32 Site Sponsor
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
Are take one please posted can you send payment details and I will sort ASAP Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
24th Sep 2013 8:41 am
woody32 Site Sponsor
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
Funds sent Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
24th Sep 2013 9:33 am
Japseroony
Member Since: 11 Feb 2008
Location: North East
Posts: 792
So one sold and one left, first £70 gets it "UNDERSTEER" ---is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" -is how fast you hit the fence.
"TORQUE" ------------is how far you take the fence with you.
24th Sep 2013 7:56 pm
johno1973
Member Since: 15 Sep 2009
Location: leeds
Posts: 166
Hi
How much of a job is it to fit these and how do I know if mine is no good ect if possible. ??
24th Sep 2013 9:59 pm
Japseroony
Member Since: 11 Feb 2008
Location: North East
Posts: 792
Not sure how easy these are to fit at all, maybe someone on here can let us know?
These over time develop a rattle and get stiff (I think they get stiff) and become annoying when driving so need replaced.
Hope this helps but if anyone can add more please let me/us know."UNDERSTEER" ---is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" -is how fast you hit the fence.
"TORQUE" ------------is how far you take the fence with you.
25th Sep 2013 4:36 pm
Japseroony
Member Since: 11 Feb 2008
Location: North East
Posts: 792
Fitting as per LR instructions here;
Published: 11-May-2011
Manual Transmission/Transaxle External Controls - TDV6 2.7L Diesel - Gearshift Lever Removal and Installation Removal
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
Remove the floor console upper trim panel.
For additional information, refer to: Floor Console Upper Panel (501-12 Instrument Panel and Console, Removal and Installation).
Remove the transfer case.
For additional information, refer to: Transfer Case - TDV6 2.7L Diesel (308-07B Transfer Case, Removal).
Release the gearshift mounting bracket.
Remove the acoustic pad.
Release the gaiter.
Remove the 2 bolts.
Release the gearshift rod.
Remove the clip.
Remove and discard the O-ring seals.
Remove the gearshift mechanism.
Release the clip.
Remove and discard the pin.
NOTE: Do not disassemble further if the component is removed for access only.
Remove the gearshift rod.
Remove and discard the clip.
Remove and discard the O-ring seals.
Remove the gaiter.
Release the gaiter from the gearshift lever ball socket.
Remove the gearshift lever.
Release the gearshift lever ball socket from the steady rod.
Remove the gearshift lever ball socket.
Remove the dust seal.
Remove the 2 clips.
Installation
Install the gearshift lever ball socket.
Clean the components.
Lubricate the components.
Install the 2 clips.
Install the dust seal.
Install the gearshift lever.
Secure the gearshift lever ball socket.
Install the gearshift lever gaiter.
Install the gaiter to the gearshift lever and ball socket.
Install the gearshift rod to the lever.
Clean the components.
Lubricate the components.
Install new O-ring seals.
Install the new clip.
Install the gearshift mechanism.
Clean the components.
Lubricate the components.
Install the new pin.
Secure the clip.
Install the gearshift rod.
Clean the components.
Lubricate the components.
Install new O-ring seals.
Install the clip.
Install the gearshift mechanism mounting bracket.
Tighten the bolts to 25 Nm (18 lb.ft).
Install the gearshift lever gaiter.
Install the acoustic pad.
Install the transfer case.
For additional information, refer to: Transfer Case - TDV6 2.7L Diesel (308-07B Transfer Case, Removal).
Install the floor console upper trim panel.
For additional information, refer to: Floor Console Upper Panel (501-12 Instrument Panel and Console, Removal and Installation)."UNDERSTEER" ---is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" -is how fast you hit the fence.
"TORQUE" ------------is how far you take the fence with you.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
