Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > In Car Electronics (D3)

Reverse Camera Install - No auto select in reverse
Post Reply  Down to end
Page 1 of 2 12>
kona_221
 


Member Since: 24 Oct 2013
Location: Cambridgeshire
Posts: 99

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Cairns BlueDiscovery 3
Reverse Camera Install - No auto select in reverse

Hi all,

I decided to finally have a look at adding a reversing camera onto my 54 D3 HSE. I purchased an SMB to RCA adapter cable a while back from this site, picked up an NTSC camera from Ebay which was listed as for Disco3.

After some background reading on the forum I decided to go for the RR mod route, so snipped the required wire and swapped over to RR mode, edited the CCF with my IID Tool to enable "reverse camera rear" and tested it via the secret menu.

From the security menu I can navigate to the camera, it's listed in the middle of the three options, has "fitted" below it and I can see the picture from the camera no problems.

However, when I head back to the normal screens and I select reverse, nothing happens in the display!

I do remember reading in one of the posts about maybe having to flash the ECU? Has anyone else had this and if so was it an ECU Flash which fixed it or am I missing something?

The car has already had the Instrument Pack ECU flashed to IPC MY07+ for pre MY07 some time ago.

I am guessing it is the Navigation ECU, which as I have a regular non-BT IID first hardware version, I need to do via a Laptop, check the MMM version and hook up to my CTEK. Well, that's what I took from reading the manual.
 54 D3 TDV6 AUTO HSE - Oct13 > Present
EGR Blank'd, Geoff's Trans Flush, RLD Sump Guard & Wheel Protector, Clear Side Repeaters, De-Tango'd, Beanie Grill, Colour Coded Arches & Tailgate, D4 Rear Lights, Traxide Split Charge, Yellow Top Aux Battery

51 Defender TD5 110 Country - Oct09 > Nov13 
 
Post #220705031st Jan 2021 11:40 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10337

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

When doing the ccf edit, do NOT select MY10 camera

After shipping the yellow wire. Do things on the display appear different.
If no , you have the wrong wire
  
Post #22070831st Feb 2021 9:24 am
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10337

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

As a test you can unplug the wiring loom to the 2 panel buttons.
Then power up the unit (not before)

Now select reverse.
  
Post #22070961st Feb 2021 9:56 am
View user's profile Send private message View poster's gallery Reply with quote
kona_221
 


Member Since: 24 Oct 2013
Location: Cambridgeshire
Posts: 99

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Cairns BlueDiscovery 3

Pete K wrote:
When doing the ccf edit, do NOT select MY10 camera

After shipping the yellow wire. Do things on the display appear different.
If no , you have the wrong wire


Hi Pete,

I will double-check the CCF via the IID tool but I only had the option to select the Reverse Camera as None/Rear/Both.

Yes the display has changed to one with more options on the home screen. I can select the Radio stations, set the Date and Time from the touch screen.
 54 D3 TDV6 AUTO HSE - Oct13 > Present
EGR Blank'd, Geoff's Trans Flush, RLD Sump Guard & Wheel Protector, Clear Side Repeaters, De-Tango'd, Beanie Grill, Colour Coded Arches & Tailgate, D4 Rear Lights, Traxide Split Charge, Yellow Top Aux Battery

51 Defender TD5 110 Country - Oct09 > Nov13 


Last edited by kona_221 on 1st Feb 2021 10:03 am. Edited 1 time in total 
Post #22071001st Feb 2021 10:00 am
View user's profile Send private message View poster's gallery Reply with quote
kona_221
 


Member Since: 24 Oct 2013
Location: Cambridgeshire
Posts: 99

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Cairns BlueDiscovery 3

Pete K wrote:
As a test you can unplug the wiring loom to the 2 panel buttons.
Then power up the unit (not before)

Now select reverse.


I'll give that a go and see what happens.

thank you
 54 D3 TDV6 AUTO HSE - Oct13 > Present
EGR Blank'd, Geoff's Trans Flush, RLD Sump Guard & Wheel Protector, Clear Side Repeaters, De-Tango'd, Beanie Grill, Colour Coded Arches & Tailgate, D4 Rear Lights, Traxide Split Charge, Yellow Top Aux Battery

51 Defender TD5 110 Country - Oct09 > Nov13 
 
Post #22071021st Feb 2021 10:02 am
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10337

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

Quote:
Reverse Camera as None/Rear/Both.


That's the parking sensors.
I think you have change the wrong thing in the CCF.
Problem found!
  
Post #22071091st Feb 2021 10:31 am
View user's profile Send private message View poster's gallery Reply with quote
kona_221
 


Member Since: 24 Oct 2013
Location: Cambridgeshire
Posts: 99

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Cairns BlueDiscovery 3

Pete K wrote:
As a test you can unplug the wiring loom to the 2 panel buttons.
Then power up the unit (not before)

Now select reverse.


Hi Pete, I have just tried this and I get the same result. Menus are the same as before and the camera doesn't come up when i select revearse.
 54 D3 TDV6 AUTO HSE - Oct13 > Present
EGR Blank'd, Geoff's Trans Flush, RLD Sump Guard & Wheel Protector, Clear Side Repeaters, De-Tango'd, Beanie Grill, Colour Coded Arches & Tailgate, D4 Rear Lights, Traxide Split Charge, Yellow Top Aux Battery

51 Defender TD5 110 Country - Oct09 > Nov13 
 
Post #22078263rd Feb 2021 9:10 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10337

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

Pete K wrote:
Quote:
Reverse Camera as None/Rear/Both.


That's the parking sensors.
I think you have change the wrong thing in the CCF.
Problem found!


I think you need to edit the ccf

Select infotainment
Then reverse cam fitted.
  
Post #22078333rd Feb 2021 9:27 pm
View user's profile Send private message View poster's gallery Reply with quote
kona_221
 


Member Since: 24 Oct 2013
Location: Cambridgeshire
Posts: 99

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Cairns BlueDiscovery 3

Pete K wrote:
Quote:
Reverse Camera as None/Rear/Both.


That's the parking sensors.
I think you have change the wrong thing in the CCF.
Problem found!


I couldn't find any other setting in CCF related to reverse camera?

CCF - Audio System - Parking Camera

I have tired setting the CCF to "none" and the Video Input Test page, Rear View Camera has "Not Fitted" - I can test the picture by clicking on it but not picture when I select reverse.

Then with the CCF set to "rear", the Video Input Test page has Rear View Camera as "Fitted" - however when I select revearse gear no display of camera comes up.
 54 D3 TDV6 AUTO HSE - Oct13 > Present
EGR Blank'd, Geoff's Trans Flush, RLD Sump Guard & Wheel Protector, Clear Side Repeaters, De-Tango'd, Beanie Grill, Colour Coded Arches & Tailgate, D4 Rear Lights, Traxide Split Charge, Yellow Top Aux Battery

51 Defender TD5 110 Country - Oct09 > Nov13 


Last edited by kona_221 on 3rd Feb 2021 10:00 pm. Edited 1 time in total 
Post #22078343rd Feb 2021 9:27 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10337

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

What tool are you using to edit ccf
  
Post #22078363rd Feb 2021 9:31 pm
View user's profile Send private message View poster's gallery Reply with quote
kona_221
 


Member Since: 24 Oct 2013
Location: Cambridgeshire
Posts: 99

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Cairns BlueDiscovery 3

I'm using a first gen IID Tool to access the car, i've tied both via the dash and also hooked to my Thinkpad.

 54 D3 TDV6 AUTO HSE - Oct13 > Present
EGR Blank'd, Geoff's Trans Flush, RLD Sump Guard & Wheel Protector, Clear Side Repeaters, De-Tango'd, Beanie Grill, Colour Coded Arches & Tailgate, D4 Rear Lights, Traxide Split Charge, Yellow Top Aux Battery

51 Defender TD5 110 Country - Oct09 > Nov13 


Last edited by kona_221 on 4th Feb 2021 8:07 am. Edited 2 times in total 
Post #22078373rd Feb 2021 9:32 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10337

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

I dunno then. Neutral

All I can think of is goto the test vechile inputs page on the
Display.
Find reverse selected. And check it changes when reverse selected.
  
Post #22078393rd Feb 2021 9:36 pm
View user's profile Send private message View poster's gallery Reply with quote
kona_221
 


Member Since: 24 Oct 2013
Location: Cambridgeshire
Posts: 99

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Cairns BlueDiscovery 3

No worries Pete, thank you for your messages.

I'm going to have a go at flashing the Navigation ECU on the weekend (subject to snow) when i can hook up my CTEK. See if that does anything.
 54 D3 TDV6 AUTO HSE - Oct13 > Present
EGR Blank'd, Geoff's Trans Flush, RLD Sump Guard & Wheel Protector, Clear Side Repeaters, De-Tango'd, Beanie Grill, Colour Coded Arches & Tailgate, D4 Rear Lights, Traxide Split Charge, Yellow Top Aux Battery

51 Defender TD5 110 Country - Oct09 > Nov13 
 
Post #22078403rd Feb 2021 9:43 pm
View user's profile Send private message View poster's gallery Reply with quote
kona_221
 


Member Since: 24 Oct 2013
Location: Cambridgeshire
Posts: 99

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Cairns BlueDiscovery 3

I have a YIE500070PVJ and I am connecting to the brown middle video input on the back. This input does come up on the middle screen (Rear View Camera) on the Video Input Test page.

I have seen reference however to the tan video input being the reversing camera? - http://media.disco3.co.uk/gallery/albums/u...cation.pdf

I did swap it over to the tan input and it did move the picture to the correct screen on the Video Input Test page, as expected.
 54 D3 TDV6 AUTO HSE - Oct13 > Present
EGR Blank'd, Geoff's Trans Flush, RLD Sump Guard & Wheel Protector, Clear Side Repeaters, De-Tango'd, Beanie Grill, Colour Coded Arches & Tailgate, D4 Rear Lights, Traxide Split Charge, Yellow Top Aux Battery

51 Defender TD5 110 Country - Oct09 > Nov13 
 
Post #22078453rd Feb 2021 10:44 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10337

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

Brown is correct.

It doesn’t appear to be seeing the fact it’s in reverse.
Check your reversing lights work.
  
Post #22078503rd Feb 2021 11:15 pm
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 1 of 2 12>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site