Member Since: 01 Mar 2024
Location: Wisbech
Posts: 71
Reverse camera
Right, I have searched and searched but the trouble is reverse camera search just brings up threads about OE cameras.
I have an aftermarket pioneer double din unit and an aftermarket camera. I wanted to know how people powered their cameras. Where did you take the power from?
29th Sep 2024 3:57 pm
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23823
No personal experience with a Discovery, but I’ve had rear cameras installed professionally on other vehicles and I believe the power source for them was taken from the reversing lights.2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)
29th Sep 2024 4:32 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1276
Usually, the camera is either powered from the din, with a trigger wire from the resvering light, or powered fully from the reversing light. Diagram may not be exact for yours but shows the theory
Click image to enlarge
2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
29th Sep 2024 6:41 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 115
I think a lot of owners (including myself) have used a piggy back fuse from the L/H fuse box behind glove box area, or take a feed from the boot 12V aux socket on LHS via a fuse. That way, the camera doesn't switch off straight away when reverse is disengaged - some displays stay on for 10 secs or so.Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
30th Sep 2024 9:07 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10674
That is certainly the case for the factory D3 and D4 displays.
I don't know about double DIN aftermarket. They probably require a reverse light trigger wire, as per the diagram, to switch to the camera display. If the red pigtail can't be used to trigger that, there are 2 reverse light fuses behind the glovebox, which could be used with a piggy back to trigger the display
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
