| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
Disco-Jim
Member Since: 01 Mar 2024
Location: Wisbech
Posts: 71
  
|
Can anyone suggest somewhere to get a key blank cut?
I have the complete fob from eBay.
I’m north east Cambridgeshire
.
|
 16th Oct 2024 8:01 pm |
|
|
rowlejohn
Member Since: 15 Sep 2017
Location: Montmorillon, Vienne (86)
Posts: 259
 
|
I only had one keyfob with car so I purchased another new fob and took it to Timpsons. The Guy there was reluctant to cut it as I had not purchased the fob from them and he could not guarantee it would work. After telling him I would not be complaing if it didn't work and would take full responsibility, he cut it and charged me £10 which I paid in cash and told him I did not want a receipt. The car was parked close to the shop so I could try it out when it was cut. The new key worked perfectly in the lock and was programmed as "Key 2" and it's working fine.
I later bought another new fob and this time I had the blank cut by a guy on Ebay who can cut them from a good photo at a decent price. I emailed him a photo and was told "Yes, I can do it". Sent the blank by post and got it back virtually by return post. That key also worked fine in the lock, was programmed as "Key 3" and again, I have not had any problems and it's been about 4 years since being done.
Every now and then I use the "Spare" keyfobs to ensure that the internal battery is kept topped up. Relocated to Mid France from N. Wales March 2021
Another Gizmo..GAP BT. Let's see how it compares with JLR IDD/SSD v.163
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1
|
| 16th Oct 2024 8:38 pm |
|
|
rowlejohn
Member Since: 15 Sep 2017
Location: Montmorillon, Vienne (86)
Posts: 259
|
Have a look here
Ebay item ref eBay Item No. 234749494846 Relocated to Mid France from N. Wales March 2021
Another Gizmo..GAP BT. Let's see how it compares with JLR IDD/SSD v.163
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1
|
| 17th Oct 2024 10:53 am |
|
|
Flapper
Member Since: 04 Feb 2015
Location: Gloucester
Posts: 355
|
are you making a new key or changing everything over as you can take the key off the old unit and put in your new one along with the battery and circuit board.
The tricky bit is setting up the spring so the key bit pops up.
|
| 17th Oct 2024 11:50 am |
|
|
rowlejohn
Member Since: 15 Sep 2017
Location: Montmorillon, Vienne (86)
Posts: 259
|
The way I read it was that he bought a new fob complete with inner PCB and is looking to get the new blade cut. Obviously it will need programming to the car afterwards.
Otherwise if it's just the shell and blade that he has it just needs the inners and blade swapping=Plenty of info on You Tube if thats the case Relocated to Mid France from N. Wales March 2021
Another Gizmo..GAP BT. Let's see how it compares with JLR IDD/SSD v.163
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1
|
| 17th Oct 2024 1:02 pm |
|
|
Disco-Jim
Member Since: 01 Mar 2024
Location: Wisbech
Posts: 71
|
Trying to get my new key cut so I have a spare 
|
| 17th Oct 2024 2:46 pm |
|
|
rowlejohn
Member Since: 15 Sep 2017
Location: Montmorillon, Vienne (86)
Posts: 259
|
TIP
I would remove the blade from the fob, it's easy to do and it can be cut without being attached to the fob.
Hold the blade at 90 deg. to the fob in a vice, you will see a small hole, in which a small hollow roll pin is hiding, tap the pin out using a small drill as a drift, slightly smaller than the hole or a small masonry nail ground down to fit if needs be. A standard nail or panel pin will probably bend or pass through the hole in the roll pin.
** The roll pin is very short and small be sure to catch it if it comes out otherwise it could be lost**
Some of the aftermarket blades are slightly wider/thicker than the original LR blades. If you go along the Ebay photo route tell them you will post your blade for cutting as their blades may be slightly larger and will need to be filed to fit into the fob but the key should still work.
Good Luck  Relocated to Mid France from N. Wales March 2021
Another Gizmo..GAP BT. Let's see how it compares with JLR IDD/SSD v.163
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1
|
| 17th Oct 2024 4:36 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
