Member Since: 19 Jan 2020
Location: Taranaki
Posts: 11
Red triangle, strong vibration, car shut down
Hi everyone, approx 4kms after having 2 new front tyres our Land Rover 4 started vibrating and we lost all power right in the middle of the road, managed to veer over to the verge. Mechanic initially thought fuel filter but turned out this wasn’t the case. Car turns on and vibrates but no power to move. Our nearest Land Rover agent is 4 hours away eeek. Any ideas what this could be? 170,000km on the clock
Last edited by Kelstevens8 on 19th Jan 2020 8:36 pm. Edited 1 time in total
19th Jan 2020 8:19 pm
3disco
Member Since: 23 Sep 2010
Location: devon chardstock
Posts: 504
Hope it’s not a broken crank!
19th Jan 2020 8:23 pm
Russell
Member Since: 24 Aug 2007
Location: Kent
Posts: 10564
Crank possibly MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
19th Jan 2020 8:27 pm
Kelstevens8
Member Since: 19 Jan 2020
Location: Taranaki
Posts: 11
Ouch, thanks, do you think it has anything to do with the turbos?
19th Jan 2020 8:34 pm
Weyboat
Member Since: 13 Apr 2018
Location: Weymouth
Posts: 261
Does it vibrate when ticking over or when you put it in drive?Gone 2016 Landmark D4
Current 2015 HSE D4 - AKA - 'Gandalf the Grey'
19th Jan 2020 9:24 pm
Kelstevens8
Member Since: 19 Jan 2020
Location: Taranaki
Posts: 11
Yes vibrates when ticking over, then shuts itself down
19th Jan 2020 9:28 pm
Weyboat
Member Since: 13 Apr 2018
Location: Weymouth
Posts: 261
I would start looking at battery cables and especially the engine earth strap.Gone 2016 Landmark D4
Current 2015 HSE D4 - AKA - 'Gandalf the Grey'
19th Jan 2020 9:36 pm
Browny90
Member Since: 19 Jul 2016
Location: Ashbourne
Posts: 687
Possibly an Injector? if a cylinder has stopped working, it may have vibration, and shut down?
have you checked the codes?Disco4 MY16 SDV6 Landmark Black
Disco4 MY12 SDV6 XS Orkney Grey (Gone)
Defender 90 200tdi Completely rebuilt.
20th Jan 2020 10:49 am
robpenrose
Member Since: 12 Jan 2016
Location: Surrey / SW London
Posts: 2136
stick a video up if you can
Current: D4 HSE
Previous: BMW Z4M Coupe
Previous: Land Rover Defender 90 CSW Td5
Previous: Land Rover Discovery Td5 ES
20th Jan 2020 11:10 am
Kelstevens8
Member Since: 19 Jan 2020
Location: Taranaki
Posts: 11
Oil filter
After popping into see the mechanic he showed me the oil filter which was full of metal filings, does anyone know why this would occur. Oil was drained and only 2l came out and should hold 7, no oil light had been going off. Does anyone know the possible cause?
21st Jan 2020 3:58 am
bembo449
Member Since: 14 Jan 2020
Location: Gainsborough
Posts: 256
yes , its chewed its bearings in the crank pal , its fugged !
21st Jan 2020 7:01 am
Kelstevens8
Member Since: 19 Jan 2020
Location: Taranaki
Posts: 11
Thanks, although it still runs then shuts itself down? Still the crank, I’m hoping for the best
21st Jan 2020 7:24 am
bembo449
Member Since: 14 Jan 2020
Location: Gainsborough
Posts: 256
the fact it still runs doesn't mean you've got away with it pal , it just means the bearings have been spat into the oil and cant get jammed into the crank as it turns , personally id stop running it , the crank maybe salvageable ?? take the oil filter out and look for metal fillings OR drop the oil and look there , I know its harsh pal but the reality is , your engine is toast
21st Jan 2020 7:48 am
Kelstevens8
Member Since: 19 Jan 2020
Location: Taranaki
Posts: 11
Thanks, I appreciate your feedback and your time. Is it worth rebuilding if toast or finding a 2nd hand engine? I have currently ordered a ship to truck 500kms to the nearest Land Rover specialist. I had oil dumped by mechanic, oil filings in filter.
21st Jan 2020 8:07 am
bembo449
Member Since: 14 Jan 2020
Location: Gainsborough
Posts: 256
from what ive read pal , these engines don't lend well to reconditioning , id get another unit , do all the necessary things like oil pump etc and maybe renew the bottom end bearing if the crank is mint , then get rid of it
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
