pussikuski
Member Since: 12 Feb 2011
Location: Oulu
Posts: 10
  
|
Hi,
any ideas how to change REAR WIPER MOTOR for my LR3?
-pussikuski
|
 12th Feb 2011 11:22 am |
|
|
StephenO
Member Since: 15 Feb 2010
Location: Scotland
Posts: 1651
  
|
I did mine last year mate, its pretty straight forward,
Pop the inner boot cover off, from memory there's 1 screw to loosen on the boot latch.
I thinks there's 4 screws that hold the motor on, cables came off pretty easy, all becomes clear when you see it.
Once the new motor is fitted start engine and turn on the rear wiper before you fit the wiper arm, that should set it to default poition and then fit you arm.
Put it all back together, job done.
Its been a while but i think thats all i did!
Hope it helps  2016 RR Sport Autobiography
 2005 D3 Zambezi Silver
1995 Defender 90 300Tdi Coniston Green
1968 Series 2a SWB Bronze Green
|
| 12th Feb 2011 3:43 pm |
|
|
pussikuski
Member Since: 12 Feb 2011
Location: Oulu
Posts: 10
|
Hi,
and thanks of your answer. Still something what I don't fully follow "Pop the inner boot cover off, from memory there's 1 screw to loosen on the boot latch. " Where is this screw, I can't find any, do I have something wrong in my eyes or what 
-pussikuski
|
| 1st Mar 2011 9:47 pm |
|
|
StephenO
Member Since: 15 Feb 2010
Location: Scotland
Posts: 1651
|
If you cant see it then it cant be there.
its on the outer wall of the handle where you would pull the boot down, after that just pull off the plastic cover around the metal locking latch. 2016 RR Sport Autobiography
2005 D3 Zambezi Silver
1995 Defender 90 300Tdi Coniston Green
1968 Series 2a SWB Bronze Green
|
| 1st Mar 2011 10:07 pm |
|
|
