Member Since: 10 Feb 2013
Location: Louth lincolnshire
Posts: 101
Rear lamp mod
What do ya think to this,
From this
To this
With a bit of this
And about 45 mins, it's not easy to wrap the lights and I'll have to redo it as I've got a couple of creases and bubbles in but it's the first time I've used it, any one got experience of wrapping cars that could give me a few pointers please
25th Mar 2014 6:40 pm
jjvd21
Member Since: 16 Jul 2007
Location: Chicago
Posts: 1070
Great effort, hard to tell the difference between the legit 2014 lights and your mod. I could see a market for a template if you were able to get the sheets correctly situated with cut outs. People could just buy the sheets and put them on.16 D4 Landmark
05 D3 HSE V8
THE original D4 spotter
25th Mar 2014 6:44 pm
vs2
Member Since: 11 Dec 2013
Location: NZ
Posts: 55
Agreed. I would buy a set.Black pack, Traxide D4-1U with jumpstart, Whispbar Rack, Nanocom, 285/50r20 Cooper LTZ's, Side steps, NZ spec-no DPF.
25th Mar 2014 6:50 pm
Jimski
Member Since: 20 Jun 2013
Location: Staffordshire
Posts: 36
Try using a mix of fairy liquid and water in a sprayer to 'float' the vinyl on. Then squeegee out with something soft as to not scratch it, then just heat gun off.
I suppose the tricky bit is getting the cuts right etc, try and use templates if you can.
Good work. Just a small point the 2014 rear lights still have the side facing red reflector, if you're after a "copy" then you may want the trim around that too Altox GSM FBH controller thread
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
Last edited by beanie on 25th Mar 2014 7:46 pm. Edited 1 time in total
25th Mar 2014 7:41 pm
petersw
Member Since: 17 Nov 2012
Location: Norfolk
Posts: 1135
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
25th Mar 2014 7:47 pm
npikey
Member Since: 10 Feb 2013
Location: Louth lincolnshire
Posts: 101
Yeah I know about the new lights, no not trying to do a copy, I've wanted to do something similar since getting the truck as I'm not Keen on the red surround after seeing the new ones I hoped they had them black all over but I don't like the reflector down the side, just my thoughts,
I started by removing the light, stuck some low tac tape over the ovals cut it out with a scalpel, and then used some 20mm tape for the rectangles, refitted the light applied the wrap, removed the light, cut round the ovals and the rectangles and removed the wrap and low tac tape to reveal the lights, hope that makes sense, the hardest part was getting the wrap on as it needed stretching and shrinking to get rid of the creases
I'm going to redo it as it's not perfect but it'll do for now, I need to practice with the wrap
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
but it's the first time I've used it, any one got experience of wrapping cars that could give me a few pointers please 
