Member Since: 20 Jun 2018
Location: Essex
Posts: 164
Rear Knuckle Bush - LR032644
Good Morning,
I have a question that I'm sure somebody will have the answer to. Can the lower rear knuckle bush be renewed with the knuckle still in-situ or does the entire assembly have to come off the vehicle? Doesn't look like a nice job in any case. Mine might need doing, depends what the MOT man says on Monday
Thank you.
10th Dec 2021 10:11 am
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4400
Yes, it is possible. You'd need a 'bush puller kit' to get the old bush out. But to be honest, by the time you've dismantled enough to get to the lower bush, you might as well put a lower arm on. You will need the geometry resetting either way.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
10th Dec 2021 10:49 am
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 762
Re: Rear Knuckle Bush - LR032644
Hobson wrote:
Good Morning,
I have a question that I'm sure somebody will have the answer to.Can the lower rear knuckle bush be renewed with the knuckle still in-situ or does the entire assembly have to come off the vehicle? Doesn't look like a nice job in any case. Mine might need doing, depends what the MOT man says on Monday
Thank you.
yes it can i purchased the tool (about £60 from the bay) to do it in situ,very easy if your competent with spanners you wont need alinement as the joint is fixed but youwill need a circlip for the bush as there not reusable after getting it offplease excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
10th Dec 2021 12:54 pm
Hobson
Member Since: 20 Jun 2018
Location: Essex
Posts: 164
Thank you both for your replies. I thought it should be possible by looking at it but it's good to get confirmation. eightfoot; would you happen to have the details and/or a link to the tool please just in case? Thank you.
10th Dec 2021 12:58 pm
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 762
rear suspension bush tool p/n 5977 laser tools, when i got it i looked at cheaper tools but was not convinced they would do the job and i also thought/think you can buy extra spacers to do the top bushes instead of buying another full tool to do them
seem to recall it took longer to get the tools out and jack the car up than changing the bush also just double checked online the bolt is a normal bolt so no re-aline neededplease excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
10th Dec 2021 3:13 pm
Hobson
Member Since: 20 Jun 2018
Location: Essex
Posts: 164
Thank you very much eightfoot. Parts and tool ordered!
10th Dec 2021 5:30 pm
Landybandy
Member Since: 10 Jul 2013
Location: Neath
Posts: 178
Thanks
eightfoot wrote:
rear suspension bush tool p/n 5977 laser tools, when i got it i looked at cheaper tools but was not convinced they would do the job and i also thought/think you can buy extra spacers to do the top bushes instead of buying another full tool to do them
seem to recall it took longer to get the tools out and jack the car up than changing the bush also just double checked online the bolt is a normal bolt so no re-aline needed
I have just ordered the tool you recommended & ordered parts myself. Thanks for the advice.Currently own
RR Sport 3.0 tdv6
Disco 3 V8 (Dearly missed)
3x Disco 1’s 2x tdi 1x V8 (Gone)
1x Disco 2 Td5 (Gone)
1x Freelander 1 (Gone no regrets)
1x Defender 90 County (missed)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
