| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
studioph
Member Since: 17 Jan 2009
Location: Bloubergrant Cape Town SA
Posts: 7
  
|
| Rattling noise from left and right front wheel Discovery 4 |
|
Rattling noise from left and right front wheel Discovery 4
Owner since Feb 2010 of new Disco 4 bought in Cape Town South Africa.
After 7000 km made a trip first time with gravel roads and after some time the left front wheel started to make a rattling noise. Dealership told me by satellite phone that it maybe was a small stone between disk and coverplate. After removing left front wheel I found nothing and all looked normal. After another 300 km the right front wheel started to make same rattling noise.
After return in Cape Town dealer checked suspension bolts but all looked normal.
Some days ago driving on tar about 40 KM per hour in a slow left bend coming van the highway you could hear the sound again from the left front wheel !!
Somebody an idea ?
See and hear at
Regards,
PH vd G
|
 1st Feb 2011 12:07 pm |
|
|
DaveC
Member Since: 29 Sep 2009
Location: Wirral
Posts: 1034
|
you got side steps or sliders?
something needs a bolt nipping up for sure!
i had an annoyiny rattle on my last car and spent a good few hours tracking it down to a badly adjusted bonnet buffer rubbing and so squeeking.
i'd had a good tug at every part near by front.
rattle sounded light so check the FBH (assuming you got one  ) exhaust, thats only thin metal so would sound like that XC90 T8 R Design Pro
MY14 D4 HSE Lux (sadly gone)
Mariana Black with Ivory interior and lots of toys!
|
| 1st Feb 2011 12:53 pm |
|
|
studioph
Member Since: 17 Jan 2009
Location: Bloubergrant Cape Town SA
Posts: 7
|
Dear Dave,
Thanks for your comment, I have no steps or sliders and remember the sound came from both front wheel areas, so may it be possible that there are small stones between brake disks and the cover plates on both sides ??
Regards
PHvdG
|
| 1st Feb 2011 1:23 pm |
|
|
DaveC
Member Since: 29 Sep 2009
Location: Wirral
Posts: 1034
|
sounds to me like something is loose rather than a stone being caught, that would grid or be a varying rattle as the stone is tossed around.
could be the disk cover plate that is loose?
i think your in for a good rummage underneath to see what moves that shouldn't!
good luck XC90 T8 R Design Pro
MY14 D4 HSE Lux (sadly gone)
Mariana Black with Ivory interior and lots of toys!
|
| 1st Feb 2011 1:36 pm |
|
|
ozd4
Member Since: 11 Nov 2009
Location: Queensland
Posts: 92
 
|
I have a very similar rattle ,had it 12mts now dealer can not find, but I'm starting to wonder if the brake caliper piston could be pulling back and letting the pad rattle 
Cheers Ken
|
| 1st Feb 2011 8:26 pm |
|
|
Q86ARR
Member Since: 23 Feb 2010
Location: Jersey
Posts: 379
|
Have you checked the gearbox undershield (if fitted) has all its bolts in place?
|
| 1st Feb 2011 10:14 pm |
|
|
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6415
 
|
as someone pointed out check all that stuff attached to the car underneath make sure u aint missing any screws
stealer did it to me and was going fecking nuts over the rattling what was missing screws on gearbox shield found by TFC last time he was doing service
|
| 1st Feb 2011 10:43 pm |
|
|
GraemeS
Member Since: 17 Mar 2008
Location: NSW
Posts: 706
|
Q86ARR wrote:Have you checked the gearbox undershield (if fitted) has all its bolts in place?
Maybe its just full of mud and gravel. Mine rattles when it gets full. Home of LLAMS, for LRs and Jeep GCs
|
| 2nd Feb 2011 5:52 am |
|
|
primadonna_lk
Member Since: 31 Dec 2009
Location: sao paulo
Posts: 4
 
|
maybe it's the break clips....
|
| 7th Feb 2011 8:10 pm |
|
|
chm
Member Since: 30 May 2010
Location: Rivonia
Posts: 26
|
I have the same issue and LR changed the clips...did not fix the issue though. regards, Carl-Hein
|
| 3rd May 2011 4:12 pm |
|
|
character
Member Since: 31 Dec 2007
Location: wiltshire
Posts: 5781
 
|
as others have said, my bets on the main engine undertray or gearbox undertray, might also have a look under the nearside front wheel arch to see if the exhaust manifold is bolted to the underside of the turbo tight.
Best bet start with the easy stuff ie the undertrays as it sounds like a bolt is either rattling around the screw whole or has come out and dislodged on the upper side of the tray....... or stones caught up there 
|
| 3rd May 2011 7:46 pm |
|
|
chm
Member Since: 30 May 2010
Location: Rivonia
Posts: 26
|
Thanks
Its going in soon, will report back... regards, Carl-Hein
|
| 4th May 2011 5:58 am |
|
|
spoons66
Member Since: 25 Jan 2010
Location: Cheshire, UK
Posts: 2
|
I have experienced the rattling gearbox undershield problem several times during my 18months of D4 ownership. Seems to be a common problem. Usually only noticable at idle and can get very loud - especially for the pedestrians nearby
Happened again this week. Went to tighten the 2 front bolts but both have rattled free!
Has anyone tried spring washers on the bolts and successfully prevented reoccurance of this problem?
|
| 26th Jul 2011 8:00 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
