Member Since: 03 Feb 2019
Location: Toronto
Posts: 132
rapid knocking from the front
the driving over potholes I get a rapid knocking sound, like a machine gun
bit annoying as its only just passed it's safety check earlier in the week
whats the most likely cause? ball joints?
10th Feb 2019 2:59 am
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4628
Does it happen under braking or all the time?yµ (idµ - eAµ) ψ=mψ
10th Feb 2019 3:32 am
Endeavour
Member Since: 03 Feb 2019
Location: Toronto
Posts: 132
happens if going over bumps/potholes - when both braking and not
not happening at other times
10th Feb 2019 1:11 pm
kajtzu
Member Since: 11 Aug 2017
Location: Helsinki
Posts: 6568
Drop link bushes are tired or/and lower front suspension bushes are shot.
10th Feb 2019 1:35 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26700
Mines doing the same under braking. Like a machine gun!
Accompanied by brake judder. Got MOT on 21st so will see what happens then.
I suspect it will need at least a front wishbone, possibly more because I took it along a rough track the other day and the steering felt very loose.
10th Feb 2019 3:21 pm
Endeavour
Member Since: 03 Feb 2019
Location: Toronto
Posts: 132
sway bar has some lateral movement in it
11th Feb 2019 8:07 pm
kajtzu
Member Since: 11 Aug 2017
Location: Helsinki
Posts: 6568
Time to replace ARB bushes then.
11th Feb 2019 8:13 pm
Endeavour
Member Since: 03 Feb 2019
Location: Toronto
Posts: 132
will do.
I should go for the square shims as well right?
11th Feb 2019 8:18 pm
kajtzu
Member Since: 11 Aug 2017
Location: Helsinki
Posts: 6568
Hmmm... I don’t have those and I replaced the ARB bushes front and rear 1 - 1 1/2 years ago. TBH I didn’t think the extra shims were needed anymore? Somehow I assumed that those were a stopgap measure at the time and the bushings were slightly different from some date forward. Mine are genuine.
11th Feb 2019 8:22 pm
Endeavour
Member Since: 03 Feb 2019
Location: Toronto
Posts: 132
i've ordered them anyway; they are $5 for the 4
as well as new bushings, brackets and bolts. So hope it warms up enough for me to fit them (working on a car outside in -20oC condition is not fun when your fingers stick to the chassis)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum