Member Since: 12 Apr 2015
Location: sunny essex
Posts: 762
question regardind rear antiroll bar
has anyone had any experience changing the rear roll bar as I need to change mine,i was wondering whether it can be removed from the underneath out through the side or will I need to remove lots of parts to gain clearance thanks for any replysplease excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
7th Oct 2017 11:51 am
Alphamale
Member Since: 28 May 2014
Location: Belfast
Posts: 496
Did mine a couple of years back, it's a body off job, well lifted anyway. You need to slacken off the body mounts down both sides and raise the body just enough to pass the roll bar out. Not much else needs removed. This is my posting from the time I did it, https://www.disco3.co.uk/forum/topic117363.html
7th Oct 2017 5:52 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1782
what is the reason to change it?
14th Oct 2017 8:40 am
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 762
reason to change is I was going to fit new bushes as I can see daylight through them but the bar is very rusty and crusty so fitting new bushes prob will not last too long,after a bit of research it looks like a mare of a job so I bodged it in the true landrover style by loosening the brackets lifting the bush and inserting a metal shim under the rubber then retightening the bushes
must have done the job as I can no longer see light through the bush please excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
14th Oct 2017 10:05 am
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1782
Replacement bushes are cheap and sounds like yours were worn, possible knocking sound
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
