DISCO3.CO.UK - View topic - Pipe inserts at every connection ?

Advertise on DISCO3.CO.UK

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Log In

DISCO3.CO.UK > Faults & Fixes (D4)

Pipe inserts at every connection ?

Page 1 of 1

Mike_Pax

Member Since: 11 Oct 2022
Location: North Yorks
Posts: 39

2010 Discovery 4 3.0 TDV6 HSE Auto Santorini Black

Pipe inserts at every connection ?

So I've bitten the bullet and bought a full Hitachi compressor kit for the Disco 4. However the kit only comes with 2 x 8mm brass inserts and 2 x 10mm brass inserts. Do i not need to use a brass insert at every plastic pipe connection i.e. 1 at each of the compressor joints and then 2 at every straight connector to the old pipes ?? So do i not need 6 inserts as the kit only comes with 4

22nd Mar 2023 7:37 am

Flack

Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6312

2007 Discovery 3 TDV6 XS Auto Stornoway Grey

Just look at the old pipe fittings to see where the brass fittings are. You have two in the rear pipes and one in each end of front pipes in to the dryer cap to the middle valve.

Flack

22nd Mar 2023 8:42 am

Mike_Pax

Member Since: 11 Oct 2022
Location: North Yorks
Posts: 39

Hi Flack...yeah i can see I deffo need them for the compressor connection as the old ones are still there, but I've had to cut the 2 hoses (the 8mm and 10mm) that now both need the new straight pipe connectors that come with the kit as well....so i thought i would need an insert in both sides of the straight connectors but the kit doesn't give enough inserts (and neither do others I've seen online)

22nd Mar 2023 9:47 am

Flack

Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6312

They will be fine without, I have seen plenty with no inserts in at all and they worked ok., if its just the straight connectors then they dont need any, those two pipes are the intake and exhaust so not high pressure .

Flack

22nd Mar 2023 4:42 pm

Mike_Pax

Member Since: 11 Oct 2022
Location: North Yorks
Posts: 39

Cheers Flack yeah that's I'm thinking now that they aren't needed on the plastic straight connector. I've checked out a few places that sell airline connectors on this small bore plastic pipe stuff and they don't seem to need inserts

22nd Mar 2023 5:27 pm

Page 1 of 1

Jump to:

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Quote Reply

DISCO3.CO.UK is independent and not affiliated to Land Rover.