DISCO3.CO.UK - View topic - Permanent 12v Supply .... again

Advertise on DISCO3.CO.UK

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Log In

DISCO3.CO.UK > Tips & Tricks

Permanent 12v Supply .... again

Page 1 of 1

RichieP

Member Since: 19 Sep 2006
Location: Reading
Posts: 380

2006 Discovery 3 TDV6 HSE Auto Lugano Teal

Permanent 12v Supply .... again

Well today I've done some of the final power wiring for my DVD/PS2/Screens and I've run up against a problem.

I a previous thread TFC mentioned the 12v supply available in the relay positions - well my car doesn't have those connections!!! it has the holes in the plastic but there is no actual connections. How strange!

So I'm now searching for a permanent supply I can tap into anyone got any ideas?

Richard

21st Dec 2006 5:20 pm

wiggs

Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372

2015 Discovery 4 3.0 SDV6 HSE Auto Fuji White

is this the same place you are looking for ?

G4 Gone ...but not forgotten

21st Dec 2006 5:58 pm

RichieP

Member Since: 19 Sep 2006
Location: Reading
Posts: 380

Hi Wiggs

Yes thats the place, but I can guarantee you there are no contact behind the holes!!

After a good 30 mins of trying to get the spade connector in, I removed the ciragette lighter relay that is next door and saw the differnce i.e. it has connectors and takes the spade fine....

Its wierd, I'll try and post a picture in the morning. At the moment I'm toying with removing the relay and using that, but I then loose one 12v socket in the front tray.

Richard

21st Dec 2006 8:30 pm

10forcash

Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534

2007 Discovery 3 TDV6 HSE Manual Zermatt Silver

Richard, how much current do you need? there's a couple of options depending on the load requirements

21st Dec 2006 10:13 pm

RichieP

Member Since: 19 Sep 2006
Location: Reading
Posts: 380

Not much - I would say the screens/switcher and DVD player are probably 4A max, and the PS2 is only 4A I believe (i've bought a Big Cat PSU - not an inverter), Even if I add the Freeview tuner were still within 10A.

I looked at the Trailer connector (as the switcher and PS2 are in the third row) but the 4mm cable is a bit closely loomed to do a 'good' hook in. Thats part of the reason i tried the 'TFC' way..... just can't beleive my luck

Thanks for any help

21st Dec 2006 10:48 pm

10forcash

Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534

If you've got the HSE as your profile says, there is a permanent feed to the seat movement relay under the passenger seat (mounted on the front seat bracket behind the plastic trim) although i'd be tempted to strip back the trailer loom and solder a tap-off wire to the permanent +ve there...
not a quick job but worth doing IMO

21st Dec 2006 11:37 pm

RichieP

Member Since: 19 Sep 2006
Location: Reading
Posts: 380

I'll have closer look at the trailer loom in the morning

Thanks for the help

22nd Dec 2006 12:11 am

Page 1 of 1

Jump to:

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Quote Reply

DISCO3.CO.UK is independent and not affiliated to Land Rover.