Member Since: 21 Feb 2011
Location: lake vyrnwy
Posts: 253
parking sensors and terrain responce not working!
hi there all iam new here so hi to all!!!
just brought a 54 plate hse auto.
the parking sensors aint working, when you put it in reverse the dash says ' front parking sensors inactive' also the rears seem to work when they want the wife says!! would like this sorting before the good lady tries to park somewere tight!!
also i just been fiddilin with it and the terrain respone nob dont do nothing just stays on road mode!
any ideas on these??
also just been looking on dash through the settings and ive got no fuel burning time settings at all!! i take this means ive had a software update to remove it( guessed this from old posts on here about it)
thanks inadvance!!
dom
24th Feb 2011 10:05 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72788
Welcome to the madhouse!! Timed FBH was one of LR's better ideas but never actually worked from day 1. Others should be along with answers/experience on other questions.
Terrain Resp switch may need worked a bit or need a new switch set, get a few posts in and then PM The Large One, aka Nick, aka Parts Guru/God from Yeovil LR re prices etc. Not too difficult to swap out.
24th Feb 2011 10:08 pm
domlandy1
Member Since: 21 Feb 2011
Location: lake vyrnwy
Posts: 253
ha ha thanks alot!!
ok then, do you think the knob out of my dads 08 hse would fit to try, how much of a job is it to swop, also dads changing his soon with main dealer mm mite work out well !!
thanks for your reply!!
has anyone else got any ideas with this, anything to try this weekend?? ive got lamp guards to fit this weekend ! (Look fun to fit!!)
25th Feb 2011 9:00 pm
domlandy1
Member Since: 21 Feb 2011
Location: lake vyrnwy
Posts: 253
any ideas peeps??
thanks
27th Feb 2011 8:33 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72788
Easy to take off the part, remove the H trim, remove gear knob, couple of screws for the transmission tunnel and the part with the switches lifts out. Find the LR fitting instructions for the cubbyhole cooler, that shows you how to do it.
Re: parking sensors and terrain responce not working!
domlandy1 wrote:
also just been looking on dash through the settings and ive got no fuel burning time settings at all!! i take this means ive had a software update to remove it( guessed this from old posts on here about it)dom
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum