Member Since: 10 Nov 2023
Location: West Midlands
Posts: 13
P2288/00 excessive smoke
Morning guys as you know I’ve been having excessive problems lately , finally got all my problems sorted relating to p2288/00 , but noticed the cars a little Smokey and smells of excessive diesel , Took the beast for a test drive only to be disappointed when it came up engine system fault and limp mode and no power what so ever , as soon as it hit limp mode the smoke were herendous when I floored it to get me back home , the smoke looked a whitey light blueish and a herendous fuel smell , same again after diagnostics p2288/00 reset the code and seemed fine hardly any smoke , ran data and got injector readings will enclose pics but as the numbers were fluctuating on the values all steadily number 6 values were changing that rapidly up and down my eyes couldn’t keep up thank you guys
19th Jan 2024 8:45 am
Disco carl
Member Since: 10 Nov 2023
Location: West Midlands
Posts: 13
Photos
Thank you
19th Jan 2024 8:47 am
Disco carl
Member Since: 10 Nov 2023
Location: West Midlands
Posts: 13
Think there here
19th Jan 2024 12:47 pm
Disco carl
Member Since: 10 Nov 2023
Location: West Midlands
Posts: 13
P2288 smoke
No body able to shed any light
23rd Jan 2024 11:25 am
disco chris
Member Since: 25 Apr 2022
Location: London
Posts: 246
Now I'm not an expert but in the absence of anyone more knowledgeable, it sounds to me like it's overfuelling, maybe one of the injectors is done for.
Injector readings would be useful as a starting point for you to understand that- maybe try and take a screenshot of the live readings and post them?
23rd Jan 2024 1:27 pm
Sidestick
Member Since: 22 Apr 2012
Location: Rome
Posts: 2288
Injector reading needs a warm engine at idle power to be consistent
In any case P2288 sounds to me to be related to HPFP - Easy-Lift suspension module 4.0
- GoodWinch 9500 lb
- Full underbody protections
- Tree/Rock sidebars
- Prospeed roofrack & ladder
- Compressor guard
- Raised Air Intake
- Driving lights (2+4)
- 50 mm Waffle boards
- Altox Heater control
- Overland Rooftop Tent
- Rear seats entertainment
- Front & Rear camera
- GVIF
- Removable tow bar
- Cubby box fridge
- BFG KO2 265/65R17
- iidTool BT
23rd Jan 2024 7:36 pm
Disco carl
Member Since: 10 Nov 2023
Location: West Midlands
Posts: 13
Click image to enlarge
Click image to enlarge
2nd Feb 2024 9:52 am
Disco carl
Member Since: 10 Nov 2023
Location: West Midlands
Posts: 13
Sorry for the late reply
2nd Feb 2024 9:53 am
Sidestick
Member Since: 22 Apr 2012
Location: Rome
Posts: 2288
Not so balanced but still inside limits...
Try to read HPFH pressure value at idle and during acceleration on full throttle,
it should be like the table below:
Click image to enlarge
- Easy-Lift suspension module 4.0
- GoodWinch 9500 lb
- Full underbody protections
- Tree/Rock sidebars
- Prospeed roofrack & ladder
- Compressor guard
- Raised Air Intake
- Driving lights (2+4)
- 50 mm Waffle boards
- Altox Heater control
- Overland Rooftop Tent
- Rear seats entertainment
- Front & Rear camera
- GVIF
- Removable tow bar
- Cubby box fridge
- BFG KO2 265/65R17
- iidTool BT
2nd Feb 2024 11:06 am
Disco carl
Member Since: 10 Nov 2023
Location: West Midlands
Posts: 13
Photos
Click image to enlarge
Click image to enlarge
Click image to enlarge
Thank you side stick I have been able to take it for a test drive yet but here’s some data I got the two photos are of the data with an engine speed of 2000 rpm and the injector values seem to balance a little better and I think it’s the third picture is at idle , all 3 photos have the pressure data there thank you
6th Feb 2024 9:20 am
Sidestick
Member Since: 22 Apr 2012
Location: Rome
Posts: 2288
So, the last pictures is definitively not at idle, as soon as revs increase from idle all the six value goes to 1000.
About pressure readings you need to be under load to have a good reference about the pressure delivered from HPFP.
Take a look at the picture below to have an idea of what to expect:
Click image to enlarge
As you can see, the purple line reaches 140 kPa, a bit lower than the maximum available value on the reference table posted above.
If you get readings at stable revs, they are not consistent. - Easy-Lift suspension module 4.0
- GoodWinch 9500 lb
- Full underbody protections
- Tree/Rock sidebars
- Prospeed roofrack & ladder
- Compressor guard
- Raised Air Intake
- Driving lights (2+4)
- 50 mm Waffle boards
- Altox Heater control
- Overland Rooftop Tent
- Rear seats entertainment
- Front & Rear camera
- GVIF
- Removable tow bar
- Cubby box fridge
- BFG KO2 265/65R17
- iidTool BT
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
