Member Since: 16 Apr 2010
Location: Centurion RSA
Posts: 154
One touch window operation
After I had to replace the battery on my 2010 D4 TDV6 SE, the one touch closing operation of all 4 windows stopped working - the one-touch opening still worked.
At least I knew that there should be some way to reset the D4 window operation... so I fiddled, and by accident I found that the following method worked:
Wind the window down a bit (it doesn’t matter how far)
Wind it back up until it stops
Within one second wind it up again and hold the button in the up position for one second.
This resets the one touch closing function.... and all four windows are back in operation again...
Cheers
CSProud owner of an IIDTool
2010 Disco 4 TDV6 SE
R2D3 the 2007 Disco 3 TDV6 SE... gone now
Romulus [Defender 110 CSW Td5] will always be missed
Rofty [Defender 110 CSW Td5] first Td5 and start of motor electronics...
www.flickr.com/photos/the_steyns
7th Jan 2012 7:03 am
stick
Member Since: 13 Jan 2010
Location: hants
Posts: 604
Just worked for me!!
Many thanks to you, and to the sited4 HSE
7th May 2013 8:53 am
Mambosasa
Member Since: 31 May 2013
Location: Birmingham
Posts: 226
Great. Just worked for me.
Many thanks.
31st May 2013 9:24 pm
Bill Wright
Member Since: 03 Nov 2007
Location: Glorious Devon
Posts: 3254
Great tip - just been through the same problem.
Bill Wright Never take life too seriously. Nobody gets out alive anyway.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum