How does one remove this 'A' pillar trim please this trim
Can anybody tell me how this trim marked 'A' on the attached pic is removed. I need to glue the flapping piece of rubber at the top?
Click image to enlarge
28th Apr 2025 4:33 pm
RonP
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15365
It’s only held on with plastic trim clips, so just carefully prise it off.
Very easy to break the trim clips, so best to have some spares at the ready.
...... always on the road less travelled 🚧
< ‘tis but a mere scratch …….. it’ll polish out.
28th Apr 2025 5:01 pm
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4368
Always replace the trim clips if you are removing it or reseal with Sikaflex (other sealants are available) as there is a potential for water ingress if the clips aren't seated properly or are broken...I want to see the sweets before I get into your windowless van... I'm not stupid!
Range Rover Velar SV Autobiography 2020
Carpathian Grey Defender Hard Top HSE X-Dynamic 2024
Corris Grey D4 Commercial SE 2016 (gone)
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
28th Apr 2025 6:19 pm
paul123
Member Since: 22 Mar 2020
Location: norwich
Posts: 257
when i had my a pillar trim off i used new clips and sealer.2005 discovery 3 tdv6
1971 200 tdi 2 door range rover
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4368
AF used to do a large box of assorted clips, might be worth asking if they still do it as there will be other clips you will need in the future and that is a very cost effective way to go I want to see the sweets before I get into your windowless van... I'm not stupid!
Range Rover Velar SV Autobiography 2020
Carpathian Grey Defender Hard Top HSE X-Dynamic 2024
Corris Grey D4 Commercial SE 2016 (gone)
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
30th Apr 2025 8:15 am
Moo D3 Decade
Member Since: 13 Aug 2010
Location: UK
Posts: 15082
I got a huge box of assorted clips etc from TEMU for nothing. So far they’ve proved really good. D4 HSE EU6 (Known as Jeeves)
New Defender L663 110 SE (known as Noddy!) Sold
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
30th Apr 2025 8:36 am
RonP
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15365
These trim clips can be bought on eBay for around £5 incl postage
Looks like you need two types - mostly Yellow with a couple of White...... always on the road less travelled 🚧
Just to wrap this thread up it looks like there are two types of fastener used, 5 (4+1) in total per side.
As RonP suggested I've just ordered enough for both sides off the bay for £5.65 delivered. Bargin
Ok rubber glued and trim is back on.
The fasteners all broke when I pulled it off.
The only thing of note is that the bottom (white in my pack) fastner that is unique would not install no matter how much I tried. Swopped to a yellow one and bingo - first time.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum