Member Since: 30 Oct 2020
Location: Wellington
Posts: 8
No high speed wiper
Al my wiper functions work fine except for high speed. If I push the lever to the top position the wipers stop wherever they happen to be.
Is it likely to just be the wiper switch?
15th Jan 2021 11:52 am
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4969
Could be, could also be the relay! You could try swapping it with another similar relay and see if it helps!
I can't recall just now the exact relay but I think it's R2. You could swap it with the fog lamps relay which I think is R4 and see if it helps pin down the issue. yµ (idµ - eAµ) ψ=mψ
15th Jan 2021 1:08 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10608
Only American cars have the fog relay I think.
15th Jan 2021 3:04 pm
MauriceP
Member Since: 30 Oct 2020
Location: Wellington
Posts: 8
Thanks for the help guys. I had a play with the relays, if I swap the slow and fast relays over the fault is still the same. If I take either of them out then no wiper function at all.
Is there anywhere where I can download wiring diagrams?
15th Jan 2021 5:26 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10608
So it’s not the relay then.
Could be motor
You could try setting the switch to fast and then remove and insert the fast relay.
If it clicks on insertion the faults under the bonnet, and I would check for power at the motor next
I think that correct from memory
15th Jan 2021 5:38 pm
MauriceP
Member Since: 30 Oct 2020
Location: Wellington
Posts: 8
No high speed wiper
Pete, should have thought of that! Thanks for the prompt. Power at motor plug so it's time to get a replacement motor.
Thanks for your help.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum