Member Since: 28 Jun 2012
Location: Centurion
Posts: 16
Old thread but can I also get this wiring diagram?
Any reason why it cant be posted on the net somewhere?
CATS
8th Jul 2013 10:20 am
kathk
Member Since: 06 Jul 2013
Location: far away
Posts: 41
I'd like that one too. Maybe someone could attach it to this post.
Is it possible to wire the spots to the high beam? So that they will go on together with the high beam?2012 D4 SDV6 HSE - Heavy Duty, Alpine Roof, Sidesteps, modded LR RAI, Stebel Nautilus, Trailer hitch cargo carrier - Best Car I've ever owned
2013 Mercedes GL500 - Iridium Silver - The Missus' car <- new A/C right after purchase, new motor mounts after 40k km. No problems with the Disco whatsoever.
8th Jul 2013 11:24 am
caverD3
Member Since: 03 Jul 2006
Location: Oberon, NSW
Posts: 6922
Just wiring a relay to high beam should work. “There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
8th Jul 2013 11:28 am
Jp743843
Member Since: 20 May 2016
Location: Potgietersrus
Posts: 1
Can someone please send me the wiring for the spotlight to... much apreciated
20th May 2016 8:01 am
harvey6480
Member Since: 30 Apr 2012
Location: Suffolk
Posts: 116
Me too please MY16 with xenon
29th May 2016 7:26 pm
Russell
Member Since: 24 Aug 2007
Location: Kent
Posts: 10564
If you want to trigger a relay using the main beam feed then the wire colour should be blue/black on one side or blue/grey. This is the wires that go into the big plug on the back of the lights and does not have the high voltage for Xenons as the unit is inside the headlight.MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
29th May 2016 7:35 pm
spikekellyrm
Member Since: 23 Jul 2015
Location: Manchester
Posts: 662
that's the answer I've been searching all night for Russel!
I need to splice into a high beam feed for my spot lights, but as I'm also in the middle of a facelift/xenon upgrade I was worried there'd be too much power.
Logic assumes that the MY12 wiring loom will still feed the MY15 headlight cluster with the same power? Therefore splicing into the blue/grey at pin 10 that operates the Motor shutter, is the wire to use? Motorshutter remains live whilst the high beam is switched on?
So many questions!
1st Nov 2016 8:36 pm
Solstice
Member Since: 26 Feb 2021
Location: Keighley
Posts: 5
Hi Folks
Just bought a disco 3 (08 Plate) to replace my Disco 2, and as I am electrically challenged could use some advice (ideally step by step) of how to wire spot lights!
Ideally I would utilise the secondary spot light switch (not Yet purchased) as I understand this will allow me to control if they come on when high beam is used or operate independently.
Is their a suitable kit available?
What size cable/Grade should I use?
Wheres the best place to get through the bulk head?
I have spent the morning looking through various threads, and plucked out some information however still don't feel I have all the info I need.
If I can gather enough help, I may do my version of an idiots guide with pics and add to the forum to help others.
Stay safe
26th Feb 2021 12:30 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1207
Hi Solstice,
I fitted a bar a couple of weeks ago, best entry through the bulkhead is from the aux battery compartment (drivers side under bonnet) there’s a spare grommet that comes out just above the gas pedal. Best to get a light bar harnes from eBay or similar as it’ll have the relay, switch and cabling pre-built.
For control, if you cut the switch wire from the relay and splice to the high beam instead then switch will only receive power when high beams are on so all good.
Hoping to get out and fit a split charger and battery today / tomorrow depending on when Hermes decide to deliver so can take photos for clarity2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
26th Feb 2021 1:17 pm
Ben4
Member Since: 28 Apr 2017
Location: Buckinghamshire
Posts: 934
Could I have a link to the Amazon harness please @KevinD3.
Thanks
Benformerly Disco3Ben
2016 D4, Santorini Black
2007 D3, Black - sold
26th Feb 2021 2:31 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1207
But have a look around, switch depends on what you want and where you intend to fit it.2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
26th Feb 2021 5:19 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1207
Hi Solstice,
As promised, started fitting the aux battery and took the photo of the grommet on the drivers side
Pop the driver side battery cover off and you’ll see it, I twisted a wood drill bit through from this side, that will make a hole in the drivers footwell carpet that you can pull the cable through, then just route it behind the dash2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
27th Feb 2021 5:42 pm
Solstice
Member Since: 26 Feb 2021
Location: Keighley
Posts: 5
Thanks Kevin D3
How does it work using the land rover spec Aux spot switch,
Has anyone got advice on which pins to use in the back of the switch?
28th Feb 2021 1:27 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1207
Have a look at this, haven’t used it so not 100% sure it’s fully correct
2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
