Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D3)

Mounts for Lightforce on Expo Rack
Post Reply  Down to end
Page 1 of 1
DiscoStu
 


Member Since: 09 Apr 2006
Location: London
Posts: 11412

England 
Mounts for Lightforce on Expo Rack

I've been asked by several people how I mounted my Lightforces on my Expedition rack, so here you go. The bracket is a piece of 3mm aluminium, with a right angled bend in it. This is then riveted to the rear and the underneath of the rail at the base of the front fairing.


This shows the brackets looking from the rear (held by 4 pop rivets)



A view from the side, showing bracket passing under the front rail



Same sort of view showing rivets under the rail



A better view from the rear


There are a couple more photo's here http://www.disco3.co.uk/gallery/thumbnails.php?album=860, but the best ones are in this post. I added the pop rivets underneath because there was a lot of play in the brackets when simply fixed from behind. With the bottom rivets they are rock solid. Still to make up my mind whether to run the wiring through the fairing or under the rail - suspect it will be under as I am going to fit a rubber strip across to reduce wind noise, and this will hide the wiring.
 Disco 5 HSE Lux
https://www.youtube.com/watch?v=peyiqaJrmMU 
 
Post #20592620th Sep 2007 1:27 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site