Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1271
Mixing your General Grabbers
Hi all, may have an opportunity for a set of General grabbers for Derick. I say set, it’s 4 wheels and tires, 2 of which have 255/55/R19 XL AT3s fitted and 2 have 255/55/R19 ATs fitted.
Would there be an issue having these as a set on a vehicle? Would fit the same on opposite corners but would tread pattern difference or the “XL” cause an issue?2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
15th Feb 2022 8:31 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15261
Wouldn’t reckon you’d have any issues, as they all have the same rolling radius (providing tread depths are similar).
But I would put each set on a different axle.
15th Feb 2022 8:49 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4512
Quote:
Would fit the same on opposite corners
Fit in pairs on front axle and rear, not opposite corners (not sure you really meant that?).
Should be fine. Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
15th Feb 2022 8:49 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1271
Thanks guys, I’ll see if I can go down and have a look at them at the weekend.
Rrhool, yes meant pairs 2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum