hinesmuk
Member Since: 06 Oct 2018
Location: Worcestershire
Posts: 34
|
I know there is loads of posts about this topic but I have quite a specific question?
Discovery 06 manual seats to Range Rover Sport electric Seats (non memory).
I have fitted the seats and have the electrics working but recline does not work? I would normally suspect the switch but both driver and passenger are doing the same any ideas?
Secondly the heated seat part of the loom isn't getting any power, I have checked all fuses, but where are the relays for the heated seats?? I have changed the HVAC control unit on the centre console and that is lighting up.
I know there is a wealth of knowledge on this forum and some help would be great. Thank you D3 07 Plate
Overlander Set Up
@Toy.Rover
|
20th Jan 2021 9:50 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
|
regarding seat heating, I think all the following conditions need to be satisfied (all at the same time)!
CCF edit to say heated seats fitted
seat temperature sensor connected and working (you can read the live value via IID to confirm)
engine running
seat elements working.
All 4 wires per seat connected between seat and cc panel (sometimes a wire or 2 is missing!)
I don't think there is a relay.
25A fuse under bonnet, but that's probably fitted anyway
|
20th Jan 2021 1:48 pm |
|
|
|
hinesmuk
Member Since: 06 Oct 2018
Location: Worcestershire
Posts: 34
|
Great thank you for your comments I will study and hopefully this is the answer D3 07 Plate
Overlander Set Up
@Toy.Rover
|
20th Jan 2021 2:57 pm |
|
|