Member Since: 04 Feb 2020
Location: Landscove
Posts: 10
D4 Service, how to reset service indicators.
Hi, always looking to save a few quid so completed service of D4 today, oil, fuel, pollen, air filter. Question is, any advice on how to reset the service indicators?
Had a trawl through the posts this evening & came across the Autel MaxiAP AP200. Would this do the trick? Haven't saved up enough pennies for the Gap IID tool.
Thanks
27th Feb 2020 11:22 pm
DrRobH
Member Since: 10 Oct 2015
Location: Hampshire
Posts: 924
iCarsoft LR2 will do it.
Britpart Lynx will do it.
I'd opt for the Lynx.Visitor from fullfatrr.com
RR Vogue SE 2011 4.4 TDV8
1974 Lightweight
28th Feb 2020 8:22 am
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26698
You could try this sequence.
1. Turn on ignition.
2. Open bonnet ( just pull the release)
3. Press brake and accelerator together for 10 seconds.
4. Switch off ignition.
5. Close bonnet.
6. Switch ignition on, service indicator should now be reset.
It worked on my 2015 Jaguar F Type, which has the same basic ccf architecture as my D4. I have never needed to do it on my D4 as I have a gap iid tool for it. The iid tool also works on my F Type, for reading faults and certain live values, ccf edits etc, but GAP have not yet put the service indicator reset in for the Jag.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
