Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > IIDTool Help

How to install
Post Reply  Down to end
Page 1 of 1
Trucks
 


Member Since: 30 Nov 2019
Location: south newton
Posts: 375

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Tonga GreenDiscovery 3
How to install

Hi
I have been using the gap diagnostic tool and i have got on well with it.
Today I checked for updates on the ecu's and found several highlights in green which were available to install but when I touch an update to install it just highlights itself then does nothing,do I need to be on a pc to install?,personally I thought the ID tool done it automatically.
The tool is up to date as from Sunday 4th April.
Secondly the sat nav screen comes on, but the actual touch screen to switch options doesn't work.
The buttons work ok but thats about all.
Basically it seems to have lost its ability to sense touch.
I did flash the satnav system hoping to cure the problem with the ID tool and the flash was successful and the screen seemed much clearer and slightly brighter/crisper but still no sense of touch.
Thanks in advance
Pete
 pete truckle  
Post #22228276th Apr 2021 7:49 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
TigerRecovery
 


Member Since: 31 May 2017
Location: Long Stratton, Norwich, Norfolk
Posts: 901

Wales 2016 Discovery 4 3.0 SDV6 Landmark LE Auto Waitomo GreyDiscovery 4

I think you need to pay for the updates before you can download them. Also, when downloading make sure you've got a charger attached to the battery as they can take a while and cause it to flatten.
 1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder! 
 
Post #22228506th Apr 2021 9:04 pm
View user's profile Send private message View poster's gallery Reply with quote
Motolab
 


Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820

Netherlands 2006 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3

Just one or two updates are free, the rest needs a fee to GAP to make them available to you (involves work for them) and then you need to upload it on a pc to your IID...

Be carefull......bottom line is.... . And Pat will warn you beforehand.... if an ECU works ok.... stay away from it....
if you have a problem with an ECU, it CAN help to update it, but doesn’t need to help...
 Best regards
Harold

Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year

Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc. Wink 
 
Post #22228816th Apr 2021 10:36 pm
View user's profile Send private message View poster's gallery Reply with quote
Trucks
 


Member Since: 30 Nov 2019
Location: south newton
Posts: 375

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Tonga GreenDiscovery 3
Install

Thank you motolab and tigerRecovery for your help and as advised will leave things as they are i don't want to change anything as my D3 has no issues at the moment( Shocked ) apart from a slow battery discharge that i had over a year ago and has returned.
Minus bloody 5 as I write this and have to go out Crying or Very sad , hope webasto starts ok.
Be safe
Thanks
 pete truckle  
Post #22228947th Apr 2021 4:37 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Flack
 


Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6305

England 2007 Discovery 3 TDV6 XS Auto Stornoway GreyDiscovery 3

A common problem with the sat nav screens when the touch stops working is that they get some dirt trapped in the surround and the screen.
Make sure its clean all around the plastic surround.

Flack Thumbs Up
  
Post #22229207th Apr 2021 9:06 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Trucks
 


Member Since: 30 Nov 2019
Location: south newton
Posts: 375

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Tonga GreenDiscovery 3

Thanks flack will check that one out tomorrow Thumbs Up
 pete truckle  
Post #22229507th Apr 2021 12:21 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10669

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

my screen delaminated, so the touch only worked in the corner.
You could tell it was loose when you pressed it.
  
Post #22229527th Apr 2021 12:52 pm
View user's profile Send private message View poster's gallery Reply with quote
Trucks
 


Member Since: 30 Nov 2019
Location: south newton
Posts: 375

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Tonga GreenDiscovery 3

The screen appears but it's the touch that's at fault this only happened along with the heater fan when the ECU was replaced in the drivers side foot well on the piller.
All plugs were checked in that area and all wires seem ok .
No fault showing on id tool either,just seems strange that those two items have stopped working after putting back the ICU.
They worked perfectly before.
Still see what happens Thursday afternoon
Thank you all
Pete
 pete truckle  
Post #22229627th Apr 2021 1:40 pm
View user's profile Send private message View poster's gallery Send e-mail Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site