Member Since: 24 Sep 2015
Location: Blackwood, Caerphilly
Posts: 6
Infotainment shut down and hazard lights coming on
Hi All,
2007 2.7 tdv6 HSE D3 90,000mls. Anyone come across these symptoms?
Driving along , radio goes off, system error message, hazards start flashing. Couldn’t turn hazards off. Pull in, turn engine off. Wait a minute turn engine back on, restarts and epb fault message. Drive off all ok. Message disappears following day.
2 weeks later, Driving along , radio goes off, no error message, hazards start flashing. Couldn’t turn hazards off. Pull in, turn engine off. Wait a minute turn engine back on, refuses to start, error message- HDC not available. Half hour later , engine restarts , no error messages. Drive off as normal.
Any thoughts before I get it checked on Monday. Thanks
9th Jun 2024 6:01 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1237
Search for cluster on here.
Common fault on post 2007 (I think) D3 when they moved to lead free solder on the circuit boards on the instrument cluster.
Next time your driving, try giving the instrument cluster a bash with your fist, see if the fault appears.
Plenty of company’s that offer repair and return2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
9th Jun 2024 7:33 pm
onetwentie
Member Since: 25 May 2020
Location: West Yorkshire
Posts: 93
OP - check the TCCM. It sits behind the battery a little lower down.
Often times there is corrosion in there and the symptoms you described can be related to that.
Let me know if you need any help.
9th Jun 2024 9:49 pm
thomamc
Member Since: 24 Sep 2015
Location: Blackwood, Caerphilly
Posts: 6
Thanks for comments and suggestions.
Sent cluster off for repair under warranty (was done last year-different symptoms). No faults found by the company but rebuilt any way. Received back (no cost to me and carriage cost covered too)and refitted last week. Cleared all fault codes and so far so good none of the problems have reoccurred.
Scanning after every journey and picking up 2 error codes repeatedly as per photo. Noticed ride seems harsh.
Any thoughts ?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
