Member Since: 03 Jan 2021
Location: Gloucester
Posts: 20
IID Tool - Gloucester - Help please
Hi,
Does anyone have an IID tool in the Gloucester area that could put the EPB into service / mounting mode? I’ve just repaired the EPB and fitted new cables etc but now the disks won’t fit
More than happy to pay for anyone who can just put it in service / mounting mode for me
Thanks,
Jamie.
4th Apr 2021 9:38 am
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2463
You have done the hard part Its most likely the shoes need adjusting theres two adjusters the normal one at the top and the other one shown below behind the shoe. I had a set arrive where this adjuster was not set correctly and i had the same issue, it should look like the picture.
Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
4th Apr 2021 10:12 am
Jamietb
Member Since: 03 Jan 2021
Location: Gloucester
Posts: 20
Yeah, I’ve reset the wedge and pushed it as far as it’ll go but the cable seems to have too much tension so the disk just won’t go on. I only threaded the new cable exactly 5 turns like it says.
I though about taking the end cap off the EPB module so the cable will come out and slacken off so I could get the disk on but surely as soon as I put back into the EPB the parking brake will be on fully tight again?
4th Apr 2021 10:19 am
scarecrow
Member Since: 14 Dec 2019
Location: Gloucestershire
Posts: 59
Hi Jamie I’m just over the river in the Forest of Dean, but could pop over to Gloucester easily enough. If that would work, drop me a pm
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum