Sonny smith
Member Since: 30 Nov 2016
Location: Solihull
Posts: 52
  
|
| HELP , mirrors with indicators |
|
Has anyone ever wired up the new mirrors , b4 I strip my lr4 door cards I was hopeing that someone new the loom connection required ,I was hope in not to strip mirrors instead if some kind chap out there could tell me the colour of the two wires that head out the mirror that control the indicators I can then route them from the door to the loom on the mirror ? By the way just to let everyone no the mirrors fold in and out and adjust just by plugging them in like the old ones did so upgrade is poss if you get a set , there expensive so clips on are a option
|
 14th Dec 2016 11:46 am |
|
|
|
|
Sonny smith
Member Since: 30 Nov 2016
Location: Solihull
Posts: 52
|
Thanks for your help but you say it should be for left hand drive vehicles the loom configurations you sent so is it the same for rhd .this diagram ???thanks again
|
| 14th Dec 2016 8:04 pm |
|
|
Irwin
Member Since: 04 Aug 2015
Location: Internet
Posts: 270
|
Yes, its the same for rhd. Take a live from indicator to green wire in pin 12 of the mirror connector. It uses a common ground so just a live is needed. If you have the approach lamp under the mirror, take a live from the door puddle light to pin 11 of the mirror connector.
|
| 14th Dec 2016 10:00 pm |
|
|
Sonny smith
Member Since: 30 Nov 2016
Location: Solihull
Posts: 52
|
Thanks for help , I'll try it later
|
| 16th Dec 2016 10:43 am |
|
|
