Member Since: 23 Mar 2012
Location: Aberuthven
Posts: 82
A Hello from Strathearn Engineering
At Strathearn Engineering you’ll find state-of-the-art Land Rover expertise, with labour rates from only £60 / hour. Located in the heart of Scotland, we are approx 20 miles North of Stirling
With over 10 combined years experience, our mechanics are Land Rover specialists with a passion for the Land Rover marque and for customer service. We maintain, repair and sell pre owned Land Rovers.
As an independent garage that has been successfully trading for almost 20 years, you can also be sure that we always work to budget: we can also offer fixed rates for servicing for some models, so there will be no surprises. Any necessary additional work is discussed, explained and costed in advance.
You decide the service deal that’s right for you; it’s why we offer the option of a fixed-price service or a price based on the actual time and materials used.
We will meet your needs in full and at all times. We can help, whether you want us to MOT your Discovery, update your service book and re-set the service reminder. We offer the option of vehicle collection and/or return.
We never forget that you are the customer. All work is undertaken by dedicated and skilled mechanics who are happy to explain the work they propose to carry out on your behalf, and to explain the work they have done.
Last edited by Strathearn Engineering on 6th Nov 2018 8:13 am. Edited 3 times in total
7th Apr 2012 7:37 am
BrianT
Member Since: 17 Nov 2009
Location: Ayrshire
Posts: 2069
Very glad to see you on the site now
BrianTMY 16 Landmark Santorini Black
MY 05 SE Adriatic Blue (Gone but not forgotten)
7th Apr 2012 9:09 am
seddie
Member Since: 23 Mar 2010
Location: Aberdeenshire
Posts: 415
Welcome to the nuthouse, we have read lots of good things about Strathearn.
What sort of price would a Discovery 3, 105,000/7 year service be, with all belts etc. I would be coming down from Turriff, Aberdeenshire and staying a couple of days, probably in Perth, or is there somewhere beside the garage that doesn't require transport.......and not Gleneagles .
Stewart.
7th Apr 2012 2:44 pm
B16 KJR
Member Since: 10 Jul 2006
Location: Rosyth, Fife
Posts: 3005
Welcome to the site, I will probably be heading your way for my next service in September.
7th Apr 2012 3:38 pm
euangibson
Member Since: 24 Dec 2010
Location: Borders
Posts: 11027
Welcome guys....the Scotland Central Area Meet (SCAM) team speak very highly of you.....now Disco Mikey can have a beer in peace the next time,and not get harangued about becoming a site sponsor.... "Better to remain silent and be thought a fool,than to speak out and remove all doubt" ?.....what rubbish...
Locking rear E-diff
RLD spare wheel protector & sump guard
Extended roof rails
Series 111 mudflaps
Black side tubes,grill and vents
Timed climate remote
Hids4u interior lights
D4 Firenze my2012 HSE
D3 Java 2005 SE manual (sold,sadly,thanks for the memories)
1966 '88 Series 2a....still starts in the morning better than I do...
7th Apr 2012 4:25 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20855
euangibson wrote:
...now Disco Mikey can have a beer in peace the next time
Member Since: 06 Sep 2006
Location: perth
Posts: 54
D4 XS
Hi What features can be enabled on a 2010 D4XS as your just down the road from me looks like i could finally get some of the features that are disabled .
cheers
stewart
8th Apr 2012 12:26 pm
Strathearn Engineering
Member Since: 23 Mar 2012
Location: Aberuthven
Posts: 82
seddie wrote:
Welcome to the nuthouse, we have read lots of good things about Strathearn.
What sort of price would a Discovery 3, 105,000/7 year service be, with all belts etc. I would be coming down from Turriff, Aberdeenshire and staying a couple of days, probably in Perth, or is there somewhere beside the garage that doesn't require transport.......and not Gleneagles .
Stewart.
Hi Stewart, we have a few options with regards to cam-belts and servicing
Firstly, cam belts. To replace the front cam belt + tensioner, and HPFP belt and tensioner, is £1300 + VAT
However, we would advise replacing the idler pulleys for the front belt, and also the aux. drive belt while it is in bits. The parts are an extra £50 + VAT, and there is no extra labour, so £1350 + VAT
With servicing, again, a few options. Normally, with a car out of warranty, we supply a service kit, which contains ALL filters (Oil, Air, Fuel + Pollen filters) and carry out a strip and clean of the brakes. Normally, we charge £375 + VAT for this service, but with a Forum Discount, we will do the service for £350 + VAT.
We always advise a brake strip and clean, as we find the brake pads do tend to seize in the carriers over time, which causes the brakes to start binding. Although, we can carry out the service without doing so, which is only an hour less labour, so £260 + VAT
However, we can also carry out the 105k service to manufacturers specification, which is then only an 'A' service, which is only an oil filter, pollen filter and some oil. I dont have exact prices to hand (closed for bank holiday) but it is likely to be around £140-£150 + VAT.
The work can be done in a day, and we do have courtesy cars available.
If it is any easier for you, we have a technician who lives in Dundee, and could meet you in the morning, or the evening before with a courtesy car, and save you some travelling, if it helps any
Last edited by Strathearn Engineering on 6th Nov 2018 8:14 am. Edited 2 times in total
9th Apr 2012 8:55 am
Strathearn Engineering
Member Since: 23 Mar 2012
Location: Aberuthven
Posts: 82
Re: D4 XS
sbell wrote:
Hi What features can be enabled on a 2010 D4XS as your just down the road from me looks like i could finally get some of the features that are disabled .
cheers
stewart
Had a quick play with our box today, to see what we could enable for your Disco 4. It was run in Demo mode, hance a few features are listed as 'undefined'
Last edited by Strathearn Engineering on 21st Jun 2015 6:45 am. Edited 2 times in total
11th Apr 2012 9:08 pm
nighthawk
Member Since: 24 Jul 2010
Location: Malta
Posts: 1163
Is "Speed Control" equivalent to "Cruise Control"?
My local indy uses autologic and I will need to activate cruise control soon but said he's never done it. Would be great if I could sit down with him and point him to the right screen to do it. Dennis
2006 Discovery 3 TDV6 Commercial Manual Buckingham Blue
12th Apr 2012 6:31 am
Strathearn Engineering
Member Since: 23 Mar 2012
Location: Aberuthven
Posts: 82
Yes, speed control is Cruise control
12th Apr 2012 7:00 am
nighthawk
Member Since: 24 Jul 2010
Location: Malta
Posts: 1163
Thanks! Dennis
2006 Discovery 3 TDV6 Commercial Manual Buckingham Blue
12th Apr 2012 7:10 am
sbell
Member Since: 06 Sep 2006
Location: perth
Posts: 54
Thanks for that would probably be interested in the 4x4 info and voice control
12th Apr 2012 9:55 am
Strathearn Engineering
Member Since: 23 Mar 2012
Location: Aberuthven
Posts: 82
Not a problem. Just pop in one day, and we will get it sorted for you
12th Apr 2012 10:41 am
grizzlymac
Member Since: 01 May 2010
Location: Blair Atholl
Posts: 67
Hi there have a discovery 4 SD XS and wonder what you can enable on it. I know you've posted a previous reply but all I seem to be able to get is "click image to enlarge"
Thanks Mac.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
.
