Member Since: 14 Apr 2017
Location: Behind you
Posts: 1022
Headlight ccf file
Just got my IID bt TOOL
How can I activate the CCF file so that I can activate the xenon headlights.
Just upgraded from halogen to xenon
Thanks
22nd Mar 2018 9:37 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13613
hi
CCF/ car config
Body control
xenon headlights yes/no
22nd Mar 2018 9:59 am
Erea
Member Since: 19 Mar 2012
Location: Munster
Posts: 1509
Switch the cornering lights as well, you might have them. Also make sure your battery is fully charged before you start.
22nd Mar 2018 11:50 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72779
And when you've selected the change, presses the "oh, go on then" button and things start flashing and whirring there is one thing it's best to do .........
........ close your eyes!!
Only kidding. It's a bit intimidating/scary at first but just follow the instructions and all will be well.
22nd Mar 2018 11:53 am
life - live it
Member Since: 14 Apr 2017
Location: Behind you
Posts: 1022
Ccf
Ok
Done the xenons but I now have a light cornering symbol flashing on dash ??
How to enable 4x4 on the sat nav now
Any help would be welcome
Cheers
Last edited by life - live it on 22nd Mar 2018 2:22 pm. Edited 1 time in total
it's flashing because you enabled the cornering lights but don't have them Pete
1965 S2a with Galv Marslands Chassis - Sold (BIG mistake)
1993 200TDi GS Green 5 Seat Manual - Broken
1993 200TDi GS Grey 7 Seat manual - Sold To Defender Owner to Use Engine
1999 TD5 GS Blenheim Silver 5 Seat Manual - Broken
1999 TD5 GS Oxford Blue 7 Seat Auto - Sold
1999 TD5 ES Epsom Green 6 Seat Auto - Sold
2007 D3 2.7 TDV6 XS Java Black 7 Seat Auto
1999 Swift Classic Coronette
2019 BMW X1 AWD Auto - SWMBO's Car
IID Tool BT
22nd Mar 2018 2:18 pm
Erea
Member Since: 19 Mar 2012
Location: Munster
Posts: 1509
Re: Ccf
life - live it wrote:
Ok
Done the xenons but I now have a light cornering symbol flashing on dash ??
How to enable 4x4 on the sat nav now
Any help would be welcome
Cheers
Is it the Adaptive headlight symbol that’s flashing? Did you select AFS xenons as opposed to standard xenons? Cornering lights are a different item and as far as I know there is no warning light for cornering lights.
22nd Mar 2018 2:34 pm
life - live it
Member Since: 14 Apr 2017
Location: Behind you
Posts: 1022
Headlights
I set the adaptive ccf file for the headlights but they still not working correctly , the cornering symbol keeps flashing on the dash.
Set the CCF file for xenon headlights and still don’t work correctly
Disabled both the above and the headlights work but upon start up flicker. I can live with that.
Am I missing something
Will have another play around over the weekend
23rd Mar 2018 3:11 pm
Erea
Member Since: 19 Mar 2012
Location: Munster
Posts: 1509
No turn off the adaptive headlight setting your car won’t have the ECU for that. Do you know are the xenons adaptive or standard? Where the side light is are there one or two bulbs? If one then you don’t have cornering lights.
23rd Mar 2018 4:10 pm
life - live it
Member Since: 14 Apr 2017
Location: Behind you
Posts: 1022
Head lights
Yes, they are cornering headlights with the additional bulb next to the side light
Cheers
23rd Mar 2018 5:25 pm
Erea
Member Since: 19 Mar 2012
Location: Munster
Posts: 1509
I’ll check my settings later but once enabled my cornering lights worked straight away. Someone on here recently was short a ground wire on each side to get theirs to work only a small thing to get them going. Remember they only work with engine running, speed below approx 40kmph lights switched on (dims or headlights) and indicator on.
The adaptive lights are a far more complex item to Retrofit with wires and an ECU to be added to get to work.
23rd Mar 2018 6:59 pm
Erea
Member Since: 19 Mar 2012
Location: Munster
Posts: 1509
These settings work fine for my ‘06 D3, if that is of any use to you.
23rd Mar 2018 9:58 pm
life - live it
Member Since: 14 Apr 2017
Location: Behind you
Posts: 1022
Thanks for that,
will have a play around tomorrow, as I am working tonight
cheers
23rd Mar 2018 10:05 pm
life - live it
Member Since: 14 Apr 2017
Location: Behind you
Posts: 1022
Hooked the IID Tool up, a little jiggery pokery and hey presto the lights are now sorted
Thanks for your help
26th Mar 2018 8:21 pm
Erea
Member Since: 19 Mar 2012
Location: Munster
Posts: 1509
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
