frostslandrover
Member Since: 23 Aug 2010
Location: hove
Posts: 3
|
| headlamp power wash retro fit |
|
hello guys and girls have a disco 3 have fitted headlamp washers to disco 3 fitted new bottle headlamp power wash pump and level sensor and all pluged in system will not work please help all relays under bonnet seem to be there and fuse ok 
|
 24th Aug 2010 1:45 pm |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18457
 
|
You probably need to enable them in the CCF.... 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 24th Aug 2010 1:57 pm |
|
|
frostslandrover
Member Since: 23 Aug 2010
Location: hove
Posts: 3
|
cheers martin will have a go and see what happens
|
| 24th Aug 2010 2:16 pm |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18457
|
Let us know how you get on...  06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 24th Aug 2010 2:45 pm |
|
|
PaulP
Member Since: 04 May 2007
Location: Barcelona
Posts: 4317
|
Yep...just checked and there is an option in the CCF for Headlamp Wash (Fitted / Not Fitted)  2006 Discovery 3 TDV6 SE Auto Buckingham Blue
2007 Golf GT DSG
|
| 24th Aug 2010 3:04 pm |
|
|
Slimer
Site Moderator
Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295
|
Don't forget when testing that it'll only work if the lights are on and only every 5th wash in 10 minutes (something along those lines anyway) The End
|
| 24th Aug 2010 3:11 pm |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18457
|
So, did it work?  06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 27th Aug 2010 2:26 pm |
|
|
frostslandrover
Member Since: 23 Aug 2010
Location: hove
Posts: 3
|
Nope fitted all the bits but can't find a way to alter the ccf without the use of a faultmate or simular diagnostic tool. The ccf is locked out to IDS so even a dealer cannot alter this. The only way is to over an seperate loom and manual switch, but I think it would look tatty.
|
| 27th Aug 2010 3:09 pm |
|
|
The Large One
Member Since: 20 Apr 2007
Location: Down the polytunnel
Posts: 6143
 
|
too add power wash to D3 you need
2 x jets
1 x connecting pipe
2 x retaining springs
1 x washer pump
1 x washer pump rubber
level indicator
you can use the same bottle as they use the same bottle for with/without but the with has 2 holes drilled for the pumps, you need to remove the bottle and drill the hole(marked) insert the grommet and pump
you do need ccf file enabled with other than IDS TLO has left the building.......
I no longer work for a Landrover Dealer
My little chilli sauce business http://www.thechillees.co.uk
if you would like to order anything just give me a shout
|
| 27th Aug 2010 4:26 pm |
|
|
