Member Since: 04 Aug 2020
Location: rotherham
Posts: 35
Looks like there were a few done around my area (Rotherham, S Yorks) last night. Might be worth keeping an eye out.
13th Nov 2020 9:21 pm
leeds
Member Since: 30 Aug 2010
Location: West Yorkshire
Posts: 4312
HW, one of my responses when people ask for discount is
"YES I will give you 40% off but I will double the price first!"
It is quite amusing watching some peoples faces after that comment!
The other comment I make is what would you tell your boss if he said he was going to discount your wages this week. Typical response is on the lines of Foxtrot Oscar!
Brendan
PS I have nothing to do with the manufacture of these headlight guards but wish Ryan well. Support the small businesses if you want them to succeed.
14th Nov 2020 12:31 pm
Johnny Oxford
Member Since: 14 Dec 2014
Location: Chinnor
Posts: 515
just fitted a set of the Terra Firma brackets to my D4 (very similar to those in this thread)
Took a little head scratching as to what the O ring is for on the long Torx Head M8 screws and where it should go in relation to the 2 large washers.
I can only summise having looked at it all, that the O ring is only there to stop the large washer dropping off of the screw, unless anyone knows different?2014 D4 HSE Facelift Corris Grey
Previous :
Discovery Sport SE (awful)
56 plate D3 HSE TDV6 Zermatt Silver
Defender 90 200tdi
16th Dec 2020 3:15 pm
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1519
Didn't know anyone else did them! The Terrafirma ones look like they cover the whole of the semi cicular release. That is good idea.
I put the o ring under the large washer under the securing brackets (as per fitting advice from earlier). That's where it was when I took the screws out. I'm wondering whether it provides a 'cushion' between the metal of the washer and the body panel.
What are these screws for anyway if you don't use them for these brackets.
CheersGary
-------------------------------------------
Discovery 4 HSE 2016MY
16th Dec 2020 4:19 pm
nigel207
Member Since: 26 Mar 2009
Location: Nottinghamshire
Posts: 1344
Just ordered a set from W1LD R (I assume) via the Fleabay link! Fingers crossed the lights will still be in place when the bits arrive!
16th Dec 2020 5:14 pm
Johnny Oxford
Member Since: 14 Dec 2014
Location: Chinnor
Posts: 515
regarding the O rings, yes I put them in the same place, but they don't provide a cushion as you suggested, as the hole is much larger than 8mm and the thread is quite far down inside (hard to describe, easier if you see it) - I think they are maybe just to retain the larger washer on the bolt when removing (although they didnt when I dismantled mine). Don't think they are important anyway - unless anyone knows different?
I didn't know there were different types either, I found this thread while looking for advice on fitting mine, I like the look of the TF ones though.
Gary_P wrote:
Didn't know anyone else did them! The Terrafirma ones look like they cover the whole of the semi cicular release. That is good idea.
I put the o ring under the large washer under the securing brackets (as per fitting advice from earlier). That's where it was when I took the screws out. I'm wondering whether it provides a 'cushion' between the metal of the washer and the body panel.
What are these screws for anyway if you don't use them for these brackets.
Cheers
2014 D4 HSE Facelift Corris Grey
Previous :
Discovery Sport SE (awful)
56 plate D3 HSE TDV6 Zermatt Silver
Defender 90 200tdi
17th Dec 2020 10:21 am
nigel207
Member Since: 26 Mar 2009
Location: Nottinghamshire
Posts: 1344
Mine arrived a few days ago and fitted today. Gary_P, it took me a little while to work out what the slot in the MkII version was for, but looking at the eBay listing, it’s used to lift the light securing levers, rather than slicing your fingers to bits or having to use a lever to lift them. Of course, if the scumbags manage to get the brackets off, they won’t bleed to death either (unfortunately)!
1st Jan 2021 6:17 pm
ashnaylor
Member Since: 04 Aug 2020
Location: rotherham
Posts: 35
Hoping this will stop the thieves.
24th Jan 2021 4:46 pm
RefStu
Member Since: 01 Feb 2021
Location: Shropshire
Posts: 7
Still available ?
1st Feb 2021 12:26 am
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1205
Yes, still available, either give W1LD R a PM, or you can buy them from him via eBay
Ordered !
Green Land Rover, Did you ever source some security screws of the right size?
Cheers
I would have also liked security screws but the length of the bolt means that they would not be very 'off the shelf' and would maybe be a special (expensive) order. Dribbled some glue into my heads to slow them down......
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum