|
|
JonM
Member Since: 24 May 2012
Location: North Yorkshire
Posts: 1247
  
|
David,
That part had me stumped for about an hour when I fitted the fridge to my D4 but it's very easy when you finally work it out.
You don't remove the bit of plastic, you remove the entire top of the centre console from the cubby box to the front dash. It lifts off complete with gear selector and EBP switch.
1: remove the cup holders in front of the cubby box - they just lift out.
2: Under the cup holders is a plate that says something like "water separator" (anyone know what it's for and why it says that?) - remove the two screws that hold it in place and remove the plate.
3: take a firm grip on either side of the top section of the centre console. Grip it near the cubby box and lift it straight up - it's just held down by clips. The whole section will lift. The wiring to the gear selector and EPB switch is long enough that you don't need to disconnect them and you don't really need to remove the front section where it joins the dash it will just lift from the back.
Hope that made sense - it is very easy if you're doing it for the second time but very scary the first time 
|
 2nd Aug 2012 8:31 pm |
|
|
Russell
Member Since: 23 Aug 2007
Location: Kent
Posts: 10564
|
Sorry but you do have to remove the small plastic panel and from memory it pulls up MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
|
| 2nd Aug 2012 8:44 pm |
|
|
xtr2turbo
Member Since: 09 Apr 2009
Location: Herts
Posts: 13
 
|
OK
Finally got it out.
It pulls out vertically but is held by to metal spring clips. Needed a very strong pull.
David
|
| 2nd Aug 2012 8:49 pm |
|
|
JonM
Member Since: 24 May 2012
Location: North Yorkshire
Posts: 1247
|
I did that first when fitting mine but still needed to take the rest if the console top off because the frame that the panel clips in to was still in the way of fitting the fridge. Taking the top of the console was much easier than getting the plastic panel out.
|
| 2nd Aug 2012 8:55 pm |
|
|
xtr2turbo
Member Since: 09 Apr 2009
Location: Herts
Posts: 13
|
Jon
yes I think you are correct. You could just lift the whole middle section up in one and leave the vertical bit of plastic in place.
Also makes it much easier to get to the Torx screws
David
|
| 2nd Aug 2012 9:18 pm |
|
|
Paul White
Member Since: 27 Jan 2012
Location: Marshfield, Nr Bath
Posts: 279
 
|
Brilliant, and I mean BRILLIANT service from TLO (AKA Nick@Yeovil). Paid for fridge yesterday at 3pm and got it today at 3.15pm!!  Cannot get better than that!!
No Instructions for fitting however, so can anyone tell me please, which instructions should I go by on this forum? JonM's on 02August or BBDisco3's on 2nd May?
I have an HSE with the rotary knob!!
Paul
|
| 17th Aug 2012 2:56 pm |
|
|
DK.44
Member Since: 01 Mar 2014
Location: Devon
Posts: 285
|
Would we be able to do another one of these if people we're interested? Obv I can imagine the price will be different. Who is best to contact about it?
|
| 29th Mar 2014 6:50 pm |
|
|
Bobs
Member Since: 29 Oct 2013
Location: Manchester
Posts: 2330
|
TLO info on page 1
|
| 29th Mar 2014 7:21 pm |
|
|
DK.44
Member Since: 01 Mar 2014
Location: Devon
Posts: 285
|
Sorry that's me being thick, cheers
|
| 29th Mar 2014 7:29 pm |
|
|
BCP
Member Since: 25 May 2005
Location: East Scotland
Posts: 1471
|
DK.44 count me in
|
| 1st May 2014 8:06 pm |
|
|
|
|
Shutts
Member Since: 26 Nov 2011
Location: Tiptree
Posts: 146
|
Me too please depending on price.
Shutts |____000_
[l_|__\___\,___
l--___--_[O==O]
()_)' '()_)-----()_)
2005 D3 SE
1998 Disco 300tdi - slow play thing
1995 Defender 300tdi - Winching play thing
Aprilia RSV 1000 - fast play thing
Honda CR250 - noisy play thing
Essex Land Rover Club member
-
Andy's Landy's - http://www.andys-landys.blogspot.com
Suspension checking workbook - http://www.disco3.co.uk/gallery/albums/use...k_v002.zip
|
| 2nd May 2014 11:53 pm |
|
|
griff488
Member Since: 21 Feb 2013
Location: Tamworth Staffs
Posts: 277
|
Are these still available? If so how mucha re they?
Cheers Griff 2004 Disco 3 TDV6 SE
1997 300TDI Disco (Rust In Peace)
Swift Accord 590
iCarsoft i930
|
| 8th Jul 2014 6:45 pm |
|
|
MattC
Member Since: 18 Nov 2013
Location: United Kingdom
Posts: 63
|
Just spoken to my LR dealer and they said that the cubby fridge couldn't be ordered for my D4 (MY14) as a part, so basically if it wasn't factory fitted, you're stuffed.
If anyone know's different and can supply, I'd be happy to take one.
|
| 10th Jul 2014 3:06 pm |
|
|
|
|
