Baben
Member Since: 15 Feb 2006
Location: Kyalami
Posts: 2059
  
|
wot size are the BFG's?
|
 26th Feb 2008 1:59 pm |
|
|
Andrew van den Heever
Member Since: 09 Jun 2007
Location: Cape Town
Posts: 340
 
|
18 inch 265/65's I don't know if they will fit into the well for the spare if deflated.
I know some people have also had issues with tyres rubbing on the wheel arches but strangely it seems not all D3's are made equal as not every body has this problem???
|
| 26th Feb 2008 2:36 pm |
|
|
Baben
Member Since: 15 Feb 2006
Location: Kyalami
Posts: 2059
|
read my post up top
|
| 26th Feb 2008 2:42 pm |
|
|
Andrew van den Heever
Member Since: 09 Jun 2007
Location: Cape Town
Posts: 340
|
OK Thanks Baben, you reckon the 275/65 STT's were OK, so the smaller 265 BFG's should be fine. 
|
| 26th Feb 2008 2:48 pm |
|
|
catweasel
Member Since: 05 May 2006
Location: Bundaleer
Posts: 4805
|
NoDo$h wrote:eeeek 
Just to warn you, the load rating on the 255/55/18 Grabber is too low for the Disco3. Should be a 112 load rating for the 18" (111 on the 17 and 19, though I've no idea why), while the tyre you have has a rating of 109. 90kg per corner too low, so a bit  if it all goes wrong.
AT2's are blooming good though
the tyre placard would suggest otherwise and not so sure about the bloomin good bit NoCa$h, as they have IMO a design fault.
|
| 26th Feb 2008 3:02 pm |
|
|
