Jim
Member Since: 09 Sep 2005
Location: Aberdeenshire
Posts: 215
  
|
Is it possible to retro fit this  Jim
|
 13th Oct 2005 11:03 am |
|
|
Slimer
Site Moderator
Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295
|
Possibly, as we discovered the wiring is there even if it's not fitted so if you can get the sensors and get a dealer to enable them it could be done
Have a chat with your dealer The End
|
| 13th Oct 2005 11:13 am |
|
|
Jim
Member Since: 09 Sep 2005
Location: Aberdeenshire
Posts: 215
|
Thanks for that.
Any one got any ideas on the LR Part No. for the Front PDC Jim
|
| 13th Oct 2005 11:33 am |
|
|
Slimer
Site Moderator
Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295
|
YDB500310PMA Sensor x 4
VTJ500070PCL Inner Front Bezel x2
VTJ500080PCL RH Outer Front Bezel
VTJ500090PCL LH Outer Front Bezel
I'd confirm this is all you need with your dealer The End
|
| 13th Oct 2005 11:57 am |
|
|
Jim
Member Since: 09 Sep 2005
Location: Aberdeenshire
Posts: 215
|
Slimer wrote:YDB500310PMA Sensor x 4
VTJ500070PCL Inner Front Bezel x2
VTJ500080PCL RH Outer Front Bezel
VTJ500090PCL LH Outer Front Bezel
I'd confirm this is all you need with your dealer
Cheers  Jim
|
| 13th Oct 2005 12:11 pm |
|
|
Jim
Member Since: 09 Sep 2005
Location: Aberdeenshire
Posts: 215
|
Is there a LR Guide to fitting the Front PDC or would the only option be to have the dealer fit it for me Jim
|
| 13th Oct 2005 12:28 pm |
|
|
Slimer
Site Moderator
Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295
|
At a guess if someone on here that has them factory fitted can give you measurements as a guide for where to drill the holes you should be able to do it yourself - or go for a wander around your dealers with a tape measure and digital camera 
Have a look at the winch fitting instructions on OwnerInfo, these will show you how to remove the plastic bumper which you'll need to do to connect them up The End
|
| 13th Oct 2005 12:38 pm |
|
|
Slimer
Site Moderator
Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295
|
Jim,
Don't forget to take lots of photos and do a blow-by-blow write up of the fitting if you do do it yourself for anyone else considering it!
Cheers
Si The End
|
| 13th Oct 2005 12:41 pm |
|
|
Jim
Member Since: 09 Sep 2005
Location: Aberdeenshire
Posts: 215
|
Guess I should have thought about the tape measure at dealers myself 
Cheers for the comment.
If anyone would be so kind  as to measure the location of the sensors, I would be eternally greatfull. Jim
|
| 13th Oct 2005 12:45 pm |
|
|
Jim
Member Since: 09 Sep 2005
Location: Aberdeenshire
Posts: 215
|
Slimer wrote:Jim,
Don't forget to take lots of photos and do a blow-by-blow write up of the fitting if you do do it yourself for anyone else considering it!
Cheers
Si
We will have to wait and see if I have the ba  ls to start it Jim
|
| 13th Oct 2005 12:54 pm |
|
|
Slimer
Site Moderator
Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295
|
Compared with fitting the winch it should be a doddle  TFC can tell you all about that (and about trying to relocate the front PDCs) The End
|
| 13th Oct 2005 1:00 pm |
|
|
Jim
Member Since: 09 Sep 2005
Location: Aberdeenshire
Posts: 215
|
Do you think TFC fancies a weekend break in Aberdeenshire not strings attached.....just a few wires and sensors  Jim
|
| 13th Oct 2005 1:02 pm |
|
|
Pelyma
Member Since: 06 Jan 2005
Location: Patching, Sussex
Posts: 15496
|
If you get enough Bombay Saphire in - but it will need to be one heck of a lot DS3 TDV6 HSE - Silver with Alpaca (old one) Gone
DS3 TDV6 HSE- Silver with Alpaca (new one) Gone
D4 HSE Lux - Montalcino Red Gone
Porsche Cayenne V8 Diesel S
|
| 13th Oct 2005 1:06 pm |
|
|
Jim
Member Since: 09 Sep 2005
Location: Aberdeenshire
Posts: 215
|
I guess we are talking cases and not bottles then Jim
|
| 13th Oct 2005 1:15 pm |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
|
Ha!  06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 13th Oct 2005 1:21 pm |
|
|
