FIXED P2290-00 (2C) Injector control pressure too low
Hi All
Please can someone tell me what possibly could cause this error code P2290-00 (2C) Injector control pressure too low. I have had new fuel filter fitted but still the same. Car drives perfect until l boot it and it comes on the dash engine system fault. I know it was a coincidence about me changing the oil but maybe I have disturbed something taking the engine cover off .what does the MAF sensor do ?
SteveD3 HSE
Last edited by Beno2 on 13th Mar 2020 2:29 pm. Edited 3 times in total
9th Mar 2020 12:54 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
I looked yesterday and ur forgot already
I think it was 5.5 for "a change"
9th Mar 2020 1:11 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 987
So would 5.7 be to much ?D3 HSE
9th Mar 2020 1:25 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 987
After the oil change I test drove it and got a message on the dash saying engine system fault and the fault code is
P2290-00 (2C) Injector control pressure too lowD3 HSE
P2290-00 (2C) indicates that the fuel pressure is lower than expected.
I would have thought that this is unlikely to be connected to your oil change.
NJSSAm I Gammon or Woke ? - I neither know nor care.
2016 Discovery 4 Landmark
2011 Mercedes Benz SL350 (R230)
1973 MG B GT V8 - 3.9L John Eales engine, 5 speed R380 gearbox, since 1975.
1959 MGA roadster - 1.9L Peter Burgess Engine - 5 speed gearbox
Past LRs - Multiple FFRs, Discos & a Series I - some petrol, some diesel,
none Electric or H2 fuel cell - yet.
There are 10 types of people in this world: Those who understand binary, and those who don’t.
9th Mar 2020 2:41 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 987
Thought so
so just a coincidenceD3 HSE
9th Mar 2020 2:56 pm
AKDisco3
Member Since: 19 Feb 2020
Location: birmingham
Posts: 10
Change the fuel filter first on this low pressure fault.
Alan.
9th Mar 2020 3:14 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 987
Hi
I have one on order. D3 HSE
9th Mar 2020 5:49 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 987
New filter fitted but get same engine system fault with the same error codeD3 HSE
12th Mar 2020 8:42 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Was the fault present before the oil change?
If not then it is as you say either a strange fluke, or more likely you have done something which seems unrelated, but is repsonsible for the fault.
12th Mar 2020 10:12 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 987
No the fault was not there before . The internet possibly says it could be poor oil ? I used 5 w 30D3 HSE
12th Mar 2020 10:27 pm
lake_District
Member Since: 14 Jan 2013
Location: Reading
Posts: 172
Having bought the new filter, was it a genuine Land Rover one?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
