Member Since: 27 Aug 2009
Location: Sussex
Posts: 52
Fitting mudflaps - help!
Hello
Trying to fit the mudflaps today but there are problems.
They don't seem to fit to the profile of the trim very well and leave a rather big gap between the mudflap and the trim (annotated in yellow), and the rising edge (in red) seem to do nothing. Also the mounting holes don't alight with the screw (in blue).
Click image to enlarge
Click image to enlarge
There are similar problems on the rear mudflaps.
Please advise, have I got the wrong parts.
Thanks
Beefy
9th Dec 2010 11:03 am
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6415
trim the bit in the red rectangle and all should be good
9th Dec 2010 11:10 am
cobblers
Member Since: 06 Dec 2008
Location: Chester
Posts: 175
I think the D4 ones are the same as the D3, if so when I did mine I deliberately didn't tighten any of the screws until the seating was good. It could be worth loosening all of them up and seeing if there is movement or re-alinging possible.
ITSR the 09MY D3/D4 ones are different to 05-08MY D3 because of the slightly changes bumpers (the ones I sell come in two different sets) so I'd check you've got the correct ones. Saying that they're not a particularly great fit anyway and can need forcing into position whilst you tighten the screws. You shouldn't have to trim anything off if they're the right onesThe End
the ones i supplied are
CAS500010PCL Front
VPLAP0017 Rear
As Simon said they are not the best fit but you shouldn't have to trim anythingTLO has left the building.......
I no longer work for a Landrover Dealer
My little chilli sauce business http://www.thechillees.co.uk
if you would like to order anything just give me a shout
9th Dec 2010 3:48 pm
doubledoom
Member Since: 09 Jul 2010
Location: Lowestoft
Posts: 132
The mudflaps also changed part number with the MY11 D4 (compared to MY10 version) suggesting a change to them in some way as well.
11th Dec 2010 8:06 pm
Beefy
Member Since: 27 Aug 2009
Location: Sussex
Posts: 52
The mudflaps are now fitted, yes, it was fiddly but got there in the end, thanks for all of the advices.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum