Member Since: 03 Jul 2006
Location: Oberon, NSW
Posts: 6922
In most counties it is illegal to have driving lights on with anything other than main beem.
Why would you want them on with low beam anyway?“There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
29th May 2008 5:50 am
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
intimidation I assume Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
29th May 2008 9:57 am
IND TDV6
Member Since: 18 Jun 2007
Location: Indonesia
Posts: 6
Unfortunately in my country its not illegal. So is there a way to have them rewired or am I stuck with the OEM setup..... ____________________
D3 TDV6 HSE
Mercedes ML 350
Mercedes 280 GE
Mercedes CLS 55 AMG
BMW R1200GS
Piaggio MP3
30th May 2008 1:22 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18510
You would have to re-wire them so that the relay is triggered on dip and main beam and not just main beam.
Do anyone know if there is a wiring diagram for how the Land Rover kit is connected up?06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
30th May 2008 2:09 pm
StornowaySA
Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406
I'm selling my spotties - PM if interested; no wiring - using the existing wiring and switch for my new replacement spotties (Lightforce) on new ARB Bar.MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
6th Jun 2008 9:46 am
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26754
Had a couple of PM's regarding this thread, so bumped
28th Jan 2009 12:19 am
MikeS2005
Member Since: 13 Sep 2008
Location: Midlothian
Posts: 920
spotlight fitting
Hi Gareth
Thanks for pointing me in the right direction I started the fitting today of my LR spotlights,not finished yet as I run out of time. If and when I buy another Disco, I dont want to drill the bumper on this one as I would take the spotlights off and then refit or resell.
Do you know if anyone has fitted the spotlights on a bracket system other than drilling the bumper, If not it looks like Im going to have to engineer something, I am also going to upgrade the LR spotlight to HID so I will let everyone know when Ive done this.
Something that I noticed on the OE wiring I got with the spotlights the terminals wont go into the plugs unless you bend a little silver tab flat on the terminal then they pop in no problem and lock into place
cheers
16th Nov 2009 8:24 pm
fedster
Member Since: 22 Nov 2008
Location: Mondov
Posts: 391
HELP!!
First.. i ask all you to pardon me for my bad english!
Second: My dealer he is trying to mount the front driving lights but in the kit, i've bought in england, we don't find masks for do holes in the bumper.
I'm becaming crazy to find them.
Is it possible that somone of you has these masks? Could you sent them to my e-mail adress, please?
Member Since: 03 Jul 2006
Location: Oberon, NSW
Posts: 6922
That would be a 'template' I assume?
I am sure someone has one left over from fitting.
Looks like it may not need one.
Instructions are on :
http://www.ownerinfo.landrover.com“There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
1st Dec 2009 12:57 am
fedster
Member Since: 22 Nov 2008
Location: Mondov
Posts: 391
Hi Carved!
Yes, i'm speaking about a template.
I didnt' remembere the correct word.
Now i've installed the spot light..but it has come out another problem: they does not start: the switch on the dash board it works and lights, but this is not for spot light.
Does anyone know if i have to enable spot light from the CPU?
Does anyone know if i have to enable spot light from the CPU?
If you've used the LR wiring kit then Yes, you'll need a dealer with IDS or someone with Autologic/Faultmate to enable themThe End
1st Dec 2009 8:50 pm
fedster
Member Since: 22 Nov 2008
Location: Mondov
Posts: 391
Slimer wrote:
fedster wrote:
Does anyone know if i have to enable spot light from the CPU?
If you've used the LR wiring kit then Yes, you'll need a dealer with IDS or someone with Autologic/Faultmate to enable them
yes..i've used al OEm parts..
i will go to dealer...
thanks guys..thanks a lot!
1st Dec 2009 8:54 pm
discodazza
Member Since: 14 Sep 2013
Location: HARLOW
Posts: 12
Just wanted to add something to this,if a few years later!
I bought this kit and had my local LR specialist fit for me.Very pleased with the look of them but thats all.
As a set of lights they make great paperweights!!!!
Also the first set I had,had a hairline crack in one of the lenses so I called my specialist(AJD LandRovers in Hoddesdon)who ordered me another set.However whilst waiting for them to arrive I had a trip to Leicester and back in the middle of summer (around 200 miles)and needless to say the car was covered in flies!So I thought I would wash the car before returning to AJD to remove the flies from the lamps,at which point I discovered that running a wet sponge over these LR lamps causes them to fill with water!!!so did the second set.And the third.
At this point Andy at AJD suggested he would take the car to The main dealer in Bishops Stortford and have them replace them.And as it turns out,they got four sets in and only found two lamps that did'nt let water in which they fitted for me.
Land Rover sent these lamps for investigation and refuse to admit that there is a problem!
Now I dont know about you guys but I would expect that spot lamps designed to fit on the front of an offroad vehicle built by the words so called premier 4x4 manufacturer would be waterproof.
I now have lamps that only leak a little bit.
None of this saga do I lay at AJD Land Rovers of Hoddesdons door,they were and are very helpfull and have said that in future they will advise customers not to go for this kit and suggest alternatives.
I would be very interested to hear from anyone else who had this water ingress problem.
Cheers and sorry to have on your bonfire!
Dazza.Disco 3,HSE,2.7 tdv6 in silver,black leather interior,privacy glass,side steps,land rover light guards and spot lamps!
19th Mar 2014 9:41 pm
colin6307
Member Since: 17 Apr 2010
Location: croydon
Posts: 246
leds
I have a D4, and thinking of fitting a Lazer T16, led, any problems with the ecu?
20th Mar 2014 9:13 am
parrafin23
Member Since: 04 Dec 2011
Location: Buskeud
Posts: 681
I do not have this kit, but i would like to make my own custom loom as close to factory spec as possible.
I found the connector under the fuse box today, I had a quick look:
I did extend those wires to outside of the box so I have something to work with.
The 2 wires, one is thicker than the other. The thickest one i guess are ment for +ve for the lamps, the other thiner one is +ve to relay coil.
In connector C0580 (CJB) pin 13, this one goes to the switch on pin 2 perhaps and pin 4 is perhaps gnd. Now the question is, is this an On/off switch or is it a pulse switch? In other words, does pin 13 on connector C0580 needs Gnd to activate the relay for the extra driving lamps, Or am I wrong here?
There is this Connector C0041 to the light switch, pin 9 and 16, Im not sure what they are for, my guess this is for backlight for the switch?
I havent got any futher than studying the installation manual and inserting a 15A fuse in pos 19.
The next I have to do, is enable this in the ccf, thats quick'n'easy.
I was hoping someone had this info, so i do not have to invent the wheel again.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum