legacy4cam
Member Since: 06 Aug 2008
Location: Lanark
Posts: 68
  
|
| FBH locking out on "overheat" |
|
Hi, FBH operates as normal once reset, but continually locks itself out after 2 or 3 starts, and wheen reading the fault codes (thanks BBS) always shows high temp or overheat.
Is there any suggestions around the sensor in the FBH, or other ideas on how to overcome this.
No intention of going to the expense of a new FBH, before anyone asks...
Had a quick search and can't find any specialists in central scotland who deal with the webasto heater.
Thanks in advance,
|
 26th Oct 2010 3:27 pm |
|
|
JimboD3
Member Since: 23 Mar 2009
Location: Hertfordshire
Posts: 348
 
|
Just a guess, but is it possible that the FBH's exhaust pipe is blocked with crud ? (exhaust is 25mm-ish diameter flexi pipe in front of n/s front wheel) Jim
Standard TDV6 HSE
Non-standard Td5 110 Hardtop
Club Traxide
|
| 26th Oct 2010 8:38 pm |
|
|
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
 
|
Is the supplementary circulation pump working well enough, if not it will heat up and cut out pretty quickly.
|
| 26th Oct 2010 9:11 pm |
|
|
legacy4cam
Member Since: 06 Aug 2008
Location: Lanark
Posts: 68
|
No , exhaust from unit clear, healthy blow when it runs.
Can't say for sure about circulation pump, not sure how you could check that easily?? It is certainly not excessively noisy.
Anyone had the unit in bits, or even better taken photos of the temp senser causing the problem.
Think I am going to remove the heater and have a look at it on the bench, when time allows.
|
| 28th Oct 2010 3:55 pm |
|
|
