DISCO3.CO.UK - View topic - How to - EPB switch replacement.

Advertise on DISCO3.CO.UK

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Log In

DISCO3.CO.UK > Faults & Fixes (D4)

How to - EPB switch replacement.

Page 1 of 1

Gareth
Site Moderator

Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26776

How to - EPB switch replacement.

My EPB has packed up and according to my iid tool it’s the switch.

There was a piece of pop corn jammed under it, and I think the wife has pushed it down on top of the kernel and it’s broken the switch. The EPB works fine if you push down hard on the switch whilst operating it.

It is logging a fault though and the only way to get the EPB off is to use the drive away function. If you try and release it with the switch it lights up the fault lights and displays EPB Fault.

What needs to come out to change the switch?

Last edited by Gareth on 30th Sep 2019 4:21 pm. Edited 1 time in total

29th Sep 2019 6:27 pm

sarumlight

Member Since: 06 Nov 2008
Location: Off the Plain
Posts: 1592

2008 Discovery 3 TDV6 HSE Auto Tonga Green

On the D3 there’s a plastic rectangle behind it that pops out and covers the screw. I know the switches are the same (chrome aside) but don’t know if it’s harder to get access to the screw on a D4?

29th Sep 2019 6:54 pm

Gareth
Site Moderator

Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26776

I’ll pull the cup holders out tomorrow and see if the screw is user there.

29th Sep 2019 7:58 pm

davidhem

Member Since: 21 Feb 2013
Location: Kenilworth
Posts: 710

2009 Discovery 3 TDV6 HSE Auto Galway Green

I have a spare D3 switch you can borrow to test it is the switch if you need it. the D3 ad D4 switch are the same, just the D4 has a chrome effect cover. David

29th Sep 2019 9:22 pm

Gareth
Site Moderator

Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26776

All fixed! Got a new switch.

1. Remove cup holder (pull upwards)

2. Reach in and remove plug from switch

3. Carefully prise out the flexible plastic shroud from in front of the EPB lever. If you work an edge free, you can carefully ease it out with a pair of pliers.

4. Remove torx screw holding switch in

5. Push switch forward to slide out. Takes a bit of fiddling.

6. Slide new switch in

7. Reconnect plug

8. Reassemble everything.

30th Sep 2019 4:20 pm

Page 1 of 1

Jump to:

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Quote Reply

DISCO3.CO.UK is independent and not affiliated to Land Rover.