Member Since: 23 Jun 2009
Location: High Wycombe
Posts: 570
that looks really good.
Out of interest, where did you get the runners from as I looking to put something together like for that for my trailer?
28th Aug 2013 7:48 am
StepanT
Member Since: 01 Jul 2008
Location: Prague
Posts: 211
Top job
I need one too D3 LE James Cook, 2,7 TDV6 auto
28th Aug 2013 8:36 am
Tony686
Member Since: 23 Oct 2007
Location: Essex
Posts: 636
Thanks for the comments.
I got the runners from ironmongery direct; they were one of the only places I could find (and local to me) which did long runners. Not expensive at all £9 for the set. They are my second set as my first I messed about a bit and they never ran true again.
TBH, it took ages to make, but to make again now I have the size and know what works and does not it’s, not that hard of the job. It’s finding out what does and does not work. I had to grind down the tops of the bolts to allow the rails to slide freely, otherwise they catch, and getting a socket in there is tricky also, just takes time, if you don’t get it accurate, they can be a bit of a pig!
If I was to make one again and had the time and got a bit of training I would weld rather than bolt and rivet, I would also use something like ABEC bearings rather than draw slides. But set that aside, it does exactly what I want and what I designed it for.
I can still get access down the left side to the upper and lower cubby boxes, I store my Ozchairs down the gap and I can still get the right rear seat up to get to the spare wheel winch and storage space. The space above the fridge was measured to take a Wolf box nice a tightly, or a Bosch L-Boxx. I also have a horizontal shelf above the wolf box spanning across the wide of the vehicle, which I store pillows sleeping bags etc out of the way from everything else. CLUB DEFNER
28th Aug 2013 10:14 am
petersw
Member Since: 17 Nov 2012
Location: Norfolk
Posts: 1135
Its very nice .... if are you thinking of making them to sell put me on your list
28th Aug 2013 10:43 am
jobster
Member Since: 08 Jul 2012
Location: Hilversum
Posts: 591
I am amazed by all this ingenuity that I find in this forum. Really looks fantastic and well made!RLD Sump Guard
GVIF & rear camera
New FBH via Dan
BAS Remap with IIDTool
28th Aug 2013 11:09 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73131
Group buy?
28th Aug 2013 11:34 am
GLYNNE
Member Since: 06 Oct 2006
Location: KENT
Posts: 4696
Looks spot on
28th Aug 2013 3:15 pm
Captain Slow
Member Since: 18 Feb 2009
Location: Herts
Posts: 459
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
