Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Technical (D3)

Drivers door glass
Post Reply  Down to end
Page 2 of 4 <1234>
Philip1972
 


Member Since: 10 Mar 2017
Location: Gloucestershire
Posts: 1072

United Kingdom 2011 Discovery 4 3.0 SDV6 GS Auto Zermatt SilverDiscovery 4

When I removed mine, the interior handle came out with it-I just had to un hook the wire from the back of the handle.

Have you removed the torx screw from the handle? (Its behind a little round plastic cover that pops out, directly behind the silver handle)
  
Post #19895306th Oct 2018 8:19 pm
View user's profile Send private message View poster's gallery Reply with quote
gstuart
 


Member Since: 21 Oct 2016
Location: kent
Posts: 13576

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Auto Java BlackDiscovery 3

Hi

Indeed I removed the entire card , also undone that handle screw behind that cover

Ah i see , about unhooking the cable

Really do apologise keep asking daft questions

Have just found the front glass runner ( nearest the hinge) that goes in the drivers door

https://www.brit-car.co.uk/product.php/175...over_sport

Also didn’t realise the regulator has the glass clips attached to it via a wire, thought at first it had like a scissor metal runner system but see it’s different , so wondering if I can just buy a new regulator that has the glass clips already attached , but got to double check what type of clips is on the glass, think it’s the screw type , unless it screws onto the white clips on the regulator

Penny dropped and makes a lot more sense

Also got to find the speaker screws as there were none, card clips etc etc in what’s missing

Including the wiring loom inside the rubber conduit which goes from the door into the cabin isn’t clipped in correctly

Just know the door card/ fixings etc hasn’t been put together properly , yet another bodge job I’ve found

Thks so much once again Thumbs Up




   
Post #19895426th Oct 2018 9:02 pm
View user's profile Send private message View poster's gallery Reply with quote
gstuart
 


Member Since: 21 Oct 2016
Location: kent
Posts: 13576

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Auto Java BlackDiscovery 3

   
Post #19895476th Oct 2018 9:18 pm
View user's profile Send private message View poster's gallery Reply with quote
Philip1972
 


Member Since: 10 Mar 2017
Location: Gloucestershire
Posts: 1072

United Kingdom 2011 Discovery 4 3.0 SDV6 GS Auto Zermatt SilverDiscovery 4

The window regulator has 2 clips that are the receivers for the 2 clips on the glass.

I don't think you can buy a regulator without the receivers.

I will send you a link in the morning to the regulator I bought, because I didn't get that from Britpart, but an eBay seller who sells LR original brand new for £29.95! That's cheaper than the second hand ones!
  
Post #19895566th Oct 2018 10:22 pm
View user's profile Send private message View poster's gallery Reply with quote
Globetrotter448
 


Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1771

Australia 2007 Discovery 3 4.0 V6 Petrol SE Auto Java BlackDiscovery 3

When I did my drivers door lock, the internal handle was attached to the door card but it only clicks into card so whomever did your door before never put it back correctly Embarassed
  
Post #19895626th Oct 2018 11:39 pm
View user's profile Send private message View poster's gallery Reply with quote
gstuart
 


Member Since: 21 Oct 2016
Location: kent
Posts: 13576

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Auto Java BlackDiscovery 3

Philip1972 wrote:
The window regulator has 2 clips that are the receivers for the 2 clips on the glass.

I don't think you can buy a regulator without the receivers.

I will send you a link in the morning to the regulator I bought, because I didn't get that from Britpart, but an eBay seller who sells LR original brand new for £29.95! That's cheaper than the second hand ones!


Hi

Many thks, Thumbs Up

Looks as though I will indeed need to get a regulator as that’s all broke as well, clips are all broke up , plus the clips on the glass are snapped in half , still they are the originals so not bad for 13 x years old

I see ref the clips , the ones u fix onto the glass clip into the other clips on the regulator , makes sense

Found the black clips in Germany and yes plse ref the regulator clips

Bless u for the help , most appreciated Bow down











   
Post #19895707th Oct 2018 1:25 am
View user's profile Send private message View poster's gallery Reply with quote
gstuart
 


Member Since: 21 Oct 2016
Location: kent
Posts: 13576

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Auto Java BlackDiscovery 3

Globetrotter448 wrote:
When I did my drivers door lock, the internal handle was attached to the door card but it only clicks into card so whomever did your door before never put it back correctly Embarassed


Hi

Many thks, Thumbs Up

Will have another look at that handle , want to disconnect it from the card so get it out the way

Rest of it , is a right mess, screws, clips missing , the front glass runner looks broke half way down and indeed speaker wasn’t even screwed in

Didn’t know I’ve got to unbolt that runner to remove the regulator

Will take me a few weeks to get everything to hand, so that I can ensure it’s all refitted properly

Did wonder why there was a slight rattle in the door Whistle

Also noticed the loom as it comes out of the door into the body, hasn’t been installed correctly , that looks a right pig , I’ve removed the inner side panel but there’s so many wires in the way don’t think I’ll be able to push the rubber conduit into the body from inside

Think it will be a case of using something plastic so I can slowly push it back correctly , don’t want any risk of water ingress , or maybe push it through the body , then see if I can pull the conduit back and Into the grooves

Thks again Thumbs Up
   
Post #19895717th Oct 2018 1:35 am
View user's profile Send private message View poster's gallery Reply with quote
Globetrotter448
 


Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1771

Australia 2007 Discovery 3 4.0 V6 Petrol SE Auto Java BlackDiscovery 3

Just remembered, there is a screw in the door handle which should help hold the door card in place when fitted correctly
  
Post #19895747th Oct 2018 5:02 am
View user's profile Send private message View poster's gallery Reply with quote
gstuart
 


Member Since: 21 Oct 2016
Location: kent
Posts: 13576

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Auto Java BlackDiscovery 3

Hi

Many thks Thumbs Up

Is that the one behind the small blanking plug

Got the card off yet The handle assembly doesn’t wish to come off from the card , so indeed assume there’s a hidden screw somewhere , but will just undo the cable in order I can remove the card completely

Thks as always for the info
  
Post #19895757th Oct 2018 5:50 am
View user's profile Send private message View poster's gallery Reply with quote
Philip1972
 


Member Since: 10 Mar 2017
Location: Gloucestershire
Posts: 1072

United Kingdom 2011 Discovery 4 3.0 SDV6 GS Auto Zermatt SilverDiscovery 4

Just had a look at the ebay link for the regulator, and they have sold out Sad

Was a good deal, so I am not surprised. Link to the seller below just in case (they are a LR dealer, so maybe they just had some excess stock?)

https://www.ebay.co.uk/usr/matford1?_trksid=p2047675.l2559
  
Post #19895817th Oct 2018 6:42 am
View user's profile Send private message View poster's gallery Reply with quote
Globetrotter448
 


Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1771

Australia 2007 Discovery 3 4.0 V6 Petrol SE Auto Java BlackDiscovery 3

gstuart wrote:
Hi

Many thks Thumbs Up

Is that the one behind the small blanking plug

Got the card off yet The handle assembly doesn’t wish to come off from the card , so indeed assume there’s a hidden screw somewhere , but will just undo the cable in order I can remove the card completely

Thks as always for the info


Yes its the one behind the plug, my plastic cover was attached to the socket
  
Post #19896027th Oct 2018 8:08 am
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10336

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

Yes I think you have to remove the front runner by the speaker, to give you room to swing the regulator 90°

There is an excellent guide that was linked to further up this post.

I'm surprised the runner is broken though. It's only a bit of metal, going half way down the door
  
Post #19896207th Oct 2018 9:20 am
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10336

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

How2 guide

Philip1972 wrote:
Info here as well Thumbs Up

https://www.disco3.co.uk/forum/topic33743.html?highlight=
  
Post #19896217th Oct 2018 9:21 am
View user's profile Send private message View poster's gallery Reply with quote
gstuart
 


Member Since: 21 Oct 2016
Location: kent
Posts: 13576

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Auto Java BlackDiscovery 3

Philip1972 wrote:
Just had a look at the ebay link for the regulator, and they have sold out Sad

Was a good deal, so I am not surprised. Link to the seller below just in case (they are a LR dealer, so maybe they just had some excess stock?)

https://www.ebay.co.uk/usr/matford1?_trksid=p2047675.l2559


Hi

Many thks for the link and indeed as u say , maybe had some old stock, have found some new ones for £65 , which i think is the way to go because of it being the drivers door so used the most

So will order a new regulator and the glass clips

Thks again Thumbs Up
   
Post #19896597th Oct 2018 12:23 pm
View user's profile Send private message View poster's gallery Reply with quote
gstuart
 


Member Since: 21 Oct 2016
Location: kent
Posts: 13576

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Auto Java BlackDiscovery 3

Globetrotter448 wrote:
gstuart wrote:
Hi

Many thks Thumbs Up

Is that the one behind the small blanking plug

Got the card off yet The handle assembly doesn’t wish to come off from the card , so indeed assume there’s a hidden screw somewhere , but will just undo the cable in order I can remove the card completely

Thks as always for the info


Yes its the one behind the plug, my plastic cover was attached to the socket


Thumbs Up Thumbs Up
   
Post #19896607th Oct 2018 12:25 pm
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 2 of 4 <1234>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site