Member Since: 26 Oct 2013
Location: Liverpool
Posts: 697
Driver seatbelt replacement?
Hi All,
The drivers seatbelt on our D4 isn't retracting as fast as it did, meaning you either have to ease it back into place or risk closing the door on the buckle.
I'm assuming there is no easy fix, other than replacing the belt - anyone had this and can share any thoughts/tips? I'm assuming it's a pretty easy job to replace the belt?Cheers,
Gareth
'57 D3 2.7 TDV6 HSE gone and soon to be forgotten!
‘15 D4 3.0 SDV6 HSE Luxury
'64 Audi A6 3.0BiTDi Quattro S-Line Black Edition with lots of toys
30th Mar 2022 11:21 am
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4538
Try spraying the inside face of the belt with some silicone spray, then wiping with a cloth. Pull all of the belt out, and spray it while it retracts.
I do mine about once a year, stops the belts hanging out the door when you close it. Always improves the retract speed.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
30th Mar 2022 12:11 pm
wizbongre
Member Since: 26 Oct 2013
Location: Liverpool
Posts: 697
Ah interesting - wasn't hopeful of a possible fix. Will try that, thanks!Cheers,
Gareth
'57 D3 2.7 TDV6 HSE gone and soon to be forgotten!
‘15 D4 3.0 SDV6 HSE Luxury
'64 Audi A6 3.0BiTDi Quattro S-Line Black Edition with lots of toys
30th Mar 2022 4:28 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5063
Pull the belt out completely and immerse it in warm soapy water massaging it to get the dirt out.
You'll be surprised how much muck will come out!
Once clean, rinse it in warm water and hang it fully extended to dry. When fully dry (overnight) spray the entire belt on both sides with furniture polish, (Pledge, Mr Sheen, et al)
Again massage it into the belt and then allow it to retract.
You won't have to do it again for years. yµ (idµ - eAµ) ψ=mψ
30th Mar 2022 4:55 pm
Sylvester19
Member Since: 17 Jul 2020
Location: Central Scotland
Posts: 132
Not forgetting to clean the B pillar loop, it gets dirty as well.
30th Mar 2022 8:27 pm
galwaygreen
Member Since: 30 Oct 2011
Location: plymouth
Posts: 6525
we took ours back 4 months after new cus this was happening..chipped the paint on the pillar etc..replaced under warranty...think it may be know issue...the blighters dont tell you ...you have to discover,,,krapppo
30th Mar 2022 11:56 pm
wizbongre
Member Since: 26 Oct 2013
Location: Liverpool
Posts: 697
Thanks for all the replies on this - something for me to look into properly over the upcoming Easter Break...Cheers,
Gareth
'57 D3 2.7 TDV6 HSE gone and soon to be forgotten!
‘15 D4 3.0 SDV6 HSE Luxury
'64 Audi A6 3.0BiTDi Quattro S-Line Black Edition with lots of toys
13th Apr 2022 9:42 am
Bicycle repairman
Member Since: 18 Sep 2019
Location: Cumbria
Posts: 188
So how did you get on ?D4 GS let the retro fit begin
Heated steering wheel
Aftermarket TPMS
Double Din head unit satnav and TV
Reverse Camera
Cubby fridge
Door panel upgrade
Mood lighting
Digital Dash personalised
Back lit sun visors
4.5 Facelift front, rear and memory mirrors
Stainless bumper tread plate
6 pot Brembo conversion
HSE heated memory seats
Retro fit auto lights and wipers
LR 663 Defender alloys
275 45 20 GG AT3s
quarter of a D3
19th Apr 2022 7:03 pm
wizbongre
Member Since: 26 Oct 2013
Location: Liverpool
Posts: 697
Erm... I'll let you know when (if?!) I eventually get some time to do anything about it. Too much else going on to have a chance to look at it yet.
Its one of those things that annoys me every time I get out of the car but then gets forgotten about until next time - as its my wife's daily driver it isn't bothering me enough yet to spur action, and doesn't seem to bother her at all.
Got a load of suspension stuff to sort out as a priority first too.Cheers,
Gareth
'57 D3 2.7 TDV6 HSE gone and soon to be forgotten!
‘15 D4 3.0 SDV6 HSE Luxury
'64 Audi A6 3.0BiTDi Quattro S-Line Black Edition with lots of toys
I took the trim off my own yesterday as it has been slow to retract for ages. Sprayed some
Silicone spray in round the reel. My investigations showed the culprit is more the top mount as the reel itself seemed to bring the belt on quickly.
29th May 2022 11:39 am
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1681
Some really good advice here. Had issues with non retracting belts on one of our cars for ages. Then came across this item. With the MOT coming up, thought I'd better, at last, get around to doing something about it.
Wiped off the whole belt with a soapy sponge, let it dry and then used silicone pipe fitting spray on kitchen towel and ran the whole belt through it a couple of times. Couldn't get to the reel at the bottom as sealed inside plastic trim and couldn't be bothered to work out how to get the off, but paid special attention to top mount that the belt runs through as mentioned. Worked brilliantly. Been years since it has retracted so well. Took 10 mins ! Wish I'd done it sooner.
CheersGary
-------------------------------------------
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
