Member Since: 15 Jul 2018
Location: Seoul
Posts: 4
DLR setting
Hi
Just upgraded new version xenon headlight(after 2014) from old ver(2013)and set idd tool
- Car config - Day running light standard - enable
But there is no change after that...
I saw youtube and followed up accordingly but i don’t know why it’s not working
Please help me.. Thanks in advance
and for your reference,
when I set canadian DLR or scandinavian DLR,
xenon lamp is working on all light mode ( 0, DLR, headlight, auto mode)
I want DLR works in day time on auto mode
and want xenon lamp works in dark time on auto mode
Last edited by Rex Kwon on 15th Jul 2018 10:06 am. Edited 1 time in total
15th Jul 2018 9:14 am
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
I'm not 100% sure what you're asking but I'll try.
On my 2011 TDV6 I had Xenon headlights as an upgrade. I used an IIDTool to turn on the DLR to Scandinavian (both front and read lights are on). On top of that, I always had my headlights in auto. With the exception when the car came back from a service where they would have desperately tried to turn off the headlights but failed
For my vehicle, the Xenons used to be on all the time but during the day I think they work at a lesser light output. Certainly when going into tunnels during the day you would notice the green headlight indicator coming on, the Xenons would get brighter.
So the Xenons would be on all the time. In later models I think they started using the "fairy lights" as DLR, I'm not sure with which model that changed.
I hope that answers your question?
Ron2016 D4 TDV6 Corris Grey
IIDTool BT
15th Jul 2018 10:03 am
Rex Kwon
Member Since: 15 Jul 2018
Location: Seoul
Posts: 4
Fairy light
Thanks for your reply
Fairy light is picture I attached?
Yes I wanna set this fairy lights in all day time in auto mode.
and want xenon lights in dark(night) time in auto mode.
Can I set like above?
15th Jul 2018 10:20 am
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
Yes they are the "fairy lights". But they would be on all the time, which is what DLR (Day Light Running) light do. They don't turn off, so no auto on/off setting for them.
Ron2016 D4 TDV6 Corris Grey
IIDTool BT
15th Jul 2018 10:50 am
Rex Kwon
Member Since: 15 Jul 2018
Location: Seoul
Posts: 4
But when I set DLR standard via iid tool, there’s no change and no fairy light in day time. It’s just same as before.
Other configuration can affect DLR standard..??
16th Jul 2018 2:33 pm
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
Try setting them to "Scandinavian" ?2016 D4 TDV6 Corris Grey
IIDTool BT
16th Jul 2018 8:06 pm
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6772
Member Since: 13 Mar 2018
Location: Bathgate
Posts: 310
nope no extra wiring required for this - but you will need an additional relay to make the full beam flash work when the main beam is off, as the new lights are a single light source as apposed to the old unit that had a totally separate source for full beam
I've just done this conversion myself. The Scandinavian mode just puts the side lights on, so the signature strip will be lit but very dimly - as they are when the side lights are on
I just turned the daylight running setting on and it all worked, so not too sure what is going on with yours
Another side note, if you do turn the DRLs on at full brightness they don't dim with the indicator either, again there's a wire missing somewhere that the pre-2014 doesn't need2013 Discovery 4 HSE Lux | 2001 Defender 90 TD5 | 2007 Prodrive RB320
17th Jul 2018 4:58 pm
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1834
Member Since: 13 Mar 2018
Location: Bathgate
Posts: 310
I bought it as a kit but fitted it myself, wasn't hard
It just sends a feed to the light itself when the stock wiring activates the flash flap inside the unit
I was planning on doing a guide as quite a few people on the Facebook group were asking about it, but it was so simple it wasn't worth the hassle. The instructions were simple enough and covered it all well2013 Discovery 4 HSE Lux | 2001 Defender 90 TD5 | 2007 Prodrive RB320
20th Jul 2018 2:03 pm
Rex Kwon
Member Since: 15 Jul 2018
Location: Seoul
Posts: 4
Your below setting is what I want!
Can't I set below via IID TOOL ??
1) Headlamp switch in position 0 (off) and ignition on = front LEDs only will be illuminated
2) Headlamp switch in position 1 (sidelights) and ignition on = front LEDs and rear tail lights illuminated
3) Headlamp switch in position 2 (headlights) and ignition on = front LEDs, headlights and rear tail lights illuminated
4) Headlamp switch in position 3 (auto) and ignition on = as per (1) if light sensor detects its light and as per (3) if light sensor detects its dark
22nd Jul 2018 4:02 am
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
To have just the front LED but no tail lights is I believe the Canadian DRL setting. Have you tried that?
Ron2016 D4 TDV6 Corris Grey
IIDTool BT
22nd Jul 2018 6:21 am
Maxxed_Ross
Member Since: 13 Mar 2018
Location: Bathgate
Posts: 310
the order you mention there is what the "Daylight Running" option on IID does. I tried them all and that was the only one that lit the front only.
From memory the Canadian setting was very similar to the Scandinavian settings, but didn't light the dashboard up too2013 Discovery 4 HSE Lux | 2001 Defender 90 TD5 | 2007 Prodrive RB320
30th Aug 2018 1:29 am
Maxxed_Ross
Member Since: 13 Mar 2018
Location: Bathgate
Posts: 310
Found it, I was close
DRL CANADIAN MARKET
DRL for this market use full intensity low beam headlamps. The side marker lamps, tail lights, and license plate lamps will be on, but instrument cluster illumination will be off.
NOTE:
When DRL are active, the headlamp flash function using the left hand steering column multifunction switch will operate normally. The high beam headlamp function using the left hand steering column multifunction switch will be deactivated.
DRL DENMARK, HOLLAND, NORWAY, SWEDEN, FINLAND & POLAND
DRL for these markets use full intensity low beam headlamps. Side lamps and license plate lamps will be on, but instrument cluster illumination will be off.
NOTE:
When DRL are active, the headlamp flash function using the left hand steering column multifunction switch will operate normally. The high beam headlamp function using the left hand steering column multifunction switch will be deactivated.
d) If the lighting control switch is moved to the side lamp or headlamp positions, DRL are deactivated and normal side lamp and headlamp functionality is operational.
Powerful UK also did a Youtube video that shows some of the IID menu if you're still struggling with it2013 Discovery 4 HSE Lux | 2001 Defender 90 TD5 | 2007 Prodrive RB320
30th Aug 2018 1:34 am
Map503
Member Since: 26 Nov 2011
Location: Banbury
Posts: 173
Scandinavian Lights
Hi all,
Is there anyone in the Banbury area or passing that could enable Scandinavian lights for me on my D4.
Thanks.Now gone - D3 Zambezi silver. Smoked / limo windows, various LEDs, DVD in headrest screens. Side steps, GG AT's, software and Bluetooth upgrades by Bodsy.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
