| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
richardch
Member Since: 27 Dec 2005
Location: Zurich
Posts: 415
  
|
| Disco4 SDV6 engine drone at Motorway Speeds |
|
Our D4 seems to run very smoothly, low fuel consumption etc but at higher speeds there is quite a bit of engine drone, is this normal ie 80 mph?
|
 27th Jan 2022 4:41 pm |
|
|
richardch
Member Since: 27 Dec 2005
Location: Zurich
Posts: 415
|
seems this could be the a-pillar covers?
|
| 27th Jan 2022 4:52 pm |
|
|
Kilovolt
Member Since: 29 Jun 2015
Location: South Derbyshire
Posts: 1020
 
|
Change trims if they are old and faded. When they are not tight to the body they resonate for sure 
https://www.advancedfactors.co.uk/windscre...2540-c.asp
If they look good, just change the fixings (same page).
Note the new trims come with all the clips so do not buy extras if you go down that route.
The clips get tired, especially if you have a screen change and the fitter has yanked them off. I lost a complete side once on a motorway, just flew clean off in the outside lane 
Go for a drive without them fitted if you intend to 'service' them anyway.
 "Track day running - Don't put your foot back on the accelerator until your absolutely sure you don't have to take it off again"
Current Ride: D4 XS Commercial Baltic Blue SDV6 fully loaded with heated everything 
Track Days: BMW E36 M3 Evolution MY 1996 (3.2 Litre 377 BHP sat in 1,250 Kgs of car, with a pro safety cage and some serious braking power)
|
| 27th Jan 2022 5:56 pm |
|
|
richardch
Member Since: 27 Dec 2005
Location: Zurich
Posts: 415
|
In fact its impossible to remove the existing A pillar covers, without snapping the top lug, so best just to order new covers. I plan to paint mine body colour but its that type of plastic which resists paint and so might have to sand them first?
|
| 30th Jan 2022 6:26 pm |
|
|
richardch
Member Since: 27 Dec 2005
Location: Zurich
Posts: 415
|
and further more I have just discovered that whoever changed the windscreen previously put the top rubber finisher on back to front, no wonder we had wind noise
|
| 10th Feb 2022 1:18 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
