Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Faults & Fixes (D4)

Disco 4 removing throttle body
Post Reply  Down to end
Page 1 of 1
Mike_Pax
 


Member Since: 11 Oct 2022
Location: North Yorks
Posts: 39

United Kingdom 2010 Discovery 4 3.0 TDV6 HSE Auto Santorini BlackDiscovery 4
Disco 4 removing throttle body

Is it easy enough to remove the throttle body on a Disco 4 TDV6 ? It’s just the Y piece that looks like it might be tricky to get out of inlet manifold etc. Any tips or is it straightforward?
Cheers in advance
Mike  
Post #232812226th Feb 2023 10:20 pm
View user's profile Send private message View poster's gallery Reply with quote
darrind
 


Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2889

England 2013 Discovery 4 3.0 SDV6 HSE Auto Santorini BlackDiscovery 4

Make sure you have spare clips for the EGR connectors on the short stub ends that fit into the y piece - everything else is simple enough Thumbs Up Must stop buying shiny toys....  
Post #232813727th Feb 2023 8:09 am
View user's profile Send private message View poster's gallery Reply with quote
Mike_Pax
 


Member Since: 11 Oct 2022
Location: North Yorks
Posts: 39

United Kingdom 2010 Discovery 4 3.0 TDV6 HSE Auto Santorini BlackDiscovery 4

Brilliant thanks for confirming darrind Thumbs Up  
Post #232814527th Feb 2023 9:09 am
View user's profile Send private message View poster's gallery Reply with quote
swansty
 


Member Since: 21 Sep 2008
Location: Northern Ireland
Posts: 939

Northern Ireland 2010 Discovery 4 3.0 TDV6 XS Auto Zermatt SilverDiscovery 4

I removed the throttle body tonight to get at the leaking housing underneath. While I had it off, I decided to give it a good clean. The smaller holes on the egr pipes were totally blocked so got it all cleaned up. I took off the motor that controls the air flap and I’m fairly sure I have it all back together ok. The flap itself moves quite freely but it only “springs” in the middle range of its travel. I have to manually move it to full open or full close. Is this normal or do I need to do a bit more cleaning?
Click image to enlarge
  
Post #237499211th Aug 2024 11:00 pm
View user's profile Send private message View poster's gallery Reply with quote
C.French145
 


Member Since: 14 May 2023
Location: South Lanarkshire, Scotland
Posts: 112

Scotland 2015 Discovery 4 3.0 SDV6 HSE Lux Auto Mariana BlackDiscovery 4

Mine did the same when I cleaned it.

This is a good video. The mechanic replaced the part as it was causing the car to fault.


?si=HbdTxCFyTGxuUEJQ Craig.


~~~~~~~~~~~~~~~~~~

Current -
Discovery 4, 2015 HSE Lux. SDV6.
Previous -
D2 2003 TD5.
110 1997 300tdi.  
Post #237504212th Aug 2024 8:01 pm
View user's profile Send private message View poster's gallery Reply with quote
swansty
 


Member Since: 21 Sep 2008
Location: Northern Ireland
Posts: 939

Northern Ireland 2010 Discovery 4 3.0 TDV6 XS Auto Zermatt SilverDiscovery 4

All back together and working fine thankfully.  
Post #237504512th Aug 2024 9:21 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site